I'm in the process of doing a 13b swap, and my upper manifold (for a weber), seems to be for an S4 lower manifold not an SE one. Can I bolt up a lower manifold from a 13b S4 engine without a ton of work?

 

ive got the exact same thing on my car with the s4 weber uppper
i am running the s4 lower, you will disover that the s4s egr passage on the lim is shorter. just put a piece of tin sheet metal between the block and the manifold. with some copper RTv silicone...

good luck.

 

On a slightly unrelated topic, the GSL-SE lower intake will not bolt to a S4 n/a upper intake, correct. You would swap both at the same time.

 

finally getting started on your car?

 

yep.. its finally time, although i'm not sure if the engine I have is any good now, seems to have a sticking seal.

 

I forget what's required, but it does work. If you search it's been talked about about 152344 times.