1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Rex meets stone wall

Thread Tools
 
Search this Thread
 
Old 04-12-04, 01:41 PM
  #1  
What?

Thread Starter
 
John64's Avatar
 
Join Date: Sep 2003
Location: CT
Posts: 3,833
Likes: 0
Received 1 Like on 1 Post
Rex meets stone wall

4/12/04 What a day!! I go over a friends house to hang and park the car. I pull the E brake not thinking that its a steep driveway and maybe I should leave her in gear too. Well I come out 30 minutes later to find her at the bottom of his driveway. She hit the stonewall with the back qaurter panel then bounced the right front quarter panel into his mail box. Well after calling the insurance company I go to my autobody guy. He says $3500 -$4000 in damage. I see the sudjuster on Wednesday morning, the sutobaody guy knows him and will tell it is a mint car and to work something out. CCCRRRRAAPPPP!!!!!!!!!

What do you think of the cost? Hope its not a full total!

More to come

http://images.cardomain.com/member_i...49_93_full.jpg

http://images.cardomain.com/member_i...49_95_full.jpg

http://images.cardomain.com/member_i...49_91_full.jpg
Old 04-12-04, 01:51 PM
  #2  
love the braaaap

 
85rotarypower's Avatar
 
Join Date: Jul 2003
Location: Bognor, Ontario
Posts: 3,771
Likes: 0
Received 4 Likes on 4 Posts
I think that quote is very realistic. Body work is not cheap. And with the damage int the area it is, that just compounds the problem because that is not an easy area to fix. Just stick it out, and get it fixed. It will be worth it in the end.
Old 04-12-04, 01:55 PM
  #3  
Senior Member

 
dirty86's Avatar
 
Join Date: Oct 2003
Location: .
Posts: 510
Likes: 0
Received 0 Likes on 0 Posts
bull shiat you need to go check out some smaller shops i got a rocker panel and a rear fender dent the size of my head fixed
and the whole car painted for 600 dollers

you just need to find a cheaper place

and its not like they did a shity job
Old 04-12-04, 01:56 PM
  #4  
Rotary Enthusiast

iTrader: (1)
 
bizarro's Avatar
 
Join Date: Aug 2003
Location: NJ
Posts: 1,171
Likes: 0
Received 0 Likes on 0 Posts
oh man...sorry to hear this...

i don't know...for that much you could get another gsl-se cheaper and use this one as a parts car...

all depends on how attached you are to this one...

me? i'm attached to any FB...so if mine goes bad, i'd get another...just as long as its an FB
Old 04-12-04, 02:12 PM
  #5  
www.RPNW.org Member

 
mckinneyml's Avatar
 
Join Date: Jan 2004
Location: McMinnville, OR
Posts: 329
Likes: 0
Received 0 Likes on 0 Posts


You might want to have the alignment checked as well. The wheel looks like it might be bent in your first picture.

Could just be the angle of the picture but the tire does look like it was scuffed.

Last edited by mckinneyml; 04-12-04 at 02:16 PM.
Old 04-12-04, 02:30 PM
  #6  
Full Member

 
Illswyn's Avatar
 
Join Date: Mar 2004
Location: Holiday
Posts: 223
Likes: 0
Received 0 Likes on 0 Posts
Any body repair schools nearby you know of? That's what I'd suggest doing. Certainly it should be the cheapest, as labor should be free.
Old 04-12-04, 04:03 PM
  #7  
Junior Member

 
Tommg's Avatar
 
Join Date: Dec 2002
Location: Orlando, USA
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Ouch!! I agree that unless the axle, etc. is bent, $6-800 would be reasonable.
Old 04-12-04, 05:08 PM
  #8  
Senior Member

 
SERIES 1 XLR8's Avatar
 
Join Date: Nov 2002
Location: NEW ZEALAND.
Posts: 517
Likes: 0
Received 0 Likes on 0 Posts
Exclamation

Originally posted by bizarro
oh man...sorry to hear this...

i don't know...for that much you could get another gsl-se cheaper and use this one as a parts car...

all depends on how attached you are to this one...

me? i'm attached to any FB...so if mine goes bad, i'd get another...just as long as its an FB
Old 04-12-04, 05:18 PM
  #9  
Tom
Whack 'em and stack 'em

 
Tom's Avatar
 
Join Date: Mar 2003
Location: Clarksburg/Bridgeport WV- North Central Appalachia
Posts: 1,373
Likes: 0
Received 0 Likes on 0 Posts
I would say around here it would be somewhere around $1,500 bucks.
That sucks. Looks like a great se..
Old 04-12-04, 05:23 PM
  #10  
Banned. I got OWNED!!!
 
FB II's Avatar
 
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes on 0 Posts
dude 4,000 is fuggin rediculous. our body guys at my dealership do way more labor intensive jobs for half that cost.

Last edited by FB II; 04-12-04 at 05:26 PM.
Old 04-12-04, 06:22 PM
  #11  
Have RX-7, will restore


iTrader: (91)
 
mazdaverx713b's Avatar
 
Join Date: Oct 2003
Location: Ohio
Posts: 21,734
Received 1,062 Likes on 899 Posts
my dad has owned a body shop for years and 4K is laughable. with the paint and materials it should be no more than 1200 at the absolute MAX! that is a high quote with parts, labor and materials. i would say around 750-900.
Old 04-12-04, 10:21 PM
  #12  
SpAz!

 
Pedestrian X's Avatar
 
Join Date: Jun 2002
Location: CA
Posts: 1,134
Likes: 0
Received 1 Like on 1 Post
The rear quarter is a nasty place to get banged up. The front fender would be easy to replace. I can't tell form the pic how difficult it would be to bang out that dent in the rear but if you need to get a new bit there thats where the money is going to run up.
Old 04-12-04, 10:28 PM
  #13  
Senior Member

 
Chamele03's Avatar
 
Join Date: May 2003
Location: Springfield MO
Posts: 290
Likes: 0
Received 0 Likes on 0 Posts
Looks pretty bad........ ill give you $50

hahaha....... joking
Old 04-12-04, 10:29 PM
  #14  
love the braaaap

 
85rotarypower's Avatar
 
Join Date: Jul 2003
Location: Bognor, Ontario
Posts: 3,771
Likes: 0
Received 4 Likes on 4 Posts
I personally HATE doing body work, so I can see why something like that would cost so much. But others may not see it that way. I absolutely hate doing any kind of body work. When I do something, it normally doesn't turn out as expected, and looks real crappy. Oh well, just something I will never get into.

I would never be able to give up MY 7. I have put too many hours of hard work and sweat into it. Along with thousands of dollars, and it don't even run yet (well, not properly anyway). I just couldn't get rid of my 7 over something like that. I would just leave it the way it is untill I get the money to fix it right. But thats just me. I take great pride in my car. There is just so much custom work done to it I could not possibly recreate that.
Old 04-13-04, 12:13 AM
  #15  
Yea, I'm working on it...

 
Rotofire's Avatar
 
Join Date: Dec 2003
Location: Click click fucking click, Africa
Posts: 1,220
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by Chamele03
Looks pretty bad........ ill give you $50

hahaha....... joking

i'll give you $75

Old 04-13-04, 08:07 AM
  #16  
Heck Yes!

 
anthrax's Avatar
 
Join Date: Apr 2003
Location: Chatham, Ontario, Canada
Posts: 1,075
Likes: 0
Received 0 Likes on 0 Posts
The quote is probably high, but you need to look at what is included in that quote.

Are they going to paint the hole car, just the dammaged areas, or just the one side, is the car going to be striped to bare metal, how is the body work going to be done ie. cut the fender out and weld in a new one or fill the dents or what.

Shopping based on price is fine just make sure you are compareing appels to appels.

There are alot of differences in body shops, workmanship, and ethics. Not every one has the same commitment to quality

Besides all this NOTHING looks worse then a car with a cheap *** paint job

EDIT: Woo Hoo I have No Life
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ArmAnirx7
West RX-7 Forum
35
03-08-21 12:54 AM
zyph3r
Canadian Forum
10
09-16-18 07:14 PM
He's On Toroids
NE RX-7 Forum
48
10-19-15 08:58 PM
Jmpabon93
New Member RX-7 Technical
1
09-30-15 04:57 PM



Quick Reply: Rex meets stone wall



All times are GMT -5. The time now is 09:40 AM.