Replace All Front Suspension Bushings
10-26-06, 06:08 PM
#26
Lives on the Forum
Yeah, if there's any doubt at all then replace them. Purchase those from rockauto (I don't believe Billy stocks them). Grab the center section (adjuster) too. Pretty simple to do, but you absolutely will need to get the alignment done immediately afterward.
10-26-06, 06:19 PM
#27
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Florida
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
The front bushings and such are all original. That is why im asking so many questions... I want to tighten up the front end along with giving better ride and cornering characteristics.
Thanx for that tip on changing the tie-rod adjusters along with the new tie-rods... I might order tie-rod ends(inner/outter), tie-rod adjuster,pitman arm,idler arm through Rockauto like Kentetsu suggested w/MOOG parts, and order the other bushings I will need from ReSpeed.
Think that would sum the front end upgrading....thanx for everyones input!
Thanx for that tip on changing the tie-rod adjusters along with the new tie-rods... I might order tie-rod ends(inner/outter), tie-rod adjuster,pitman arm,idler arm through Rockauto like Kentetsu suggested w/MOOG parts, and order the other bushings I will need from ReSpeed.
Think that would sum the front end upgrading....thanx for everyones input!
Thread
Thread Starter
Forum
Replies
Last Post
GrossPolluter
Suspension/Wheels/Tires/Brakes
12
08-15-15 10:32 PM
