ive got the 12a out and Im in the process of remvoing the transmission but im stuck,
now this end will never run ever again...so i dont really care about bashing through stuff ...i need my dads side of the garage back (where the cherry picker with the rotard and tranny are in)

need help quickly please

 

There is 2 bolts to the starter after that the starter should come out easy.Then there's 4 bolts surrounding the transmission.Remove all 4 and wiggle transmisssion out.If you're facing the engine, there's 2 covers covering the flywheel.Remove and you can get to transmission to get it out after removing bolts.

 

what year and model? where are you stuck? You need to give more information on this one. Maybe start here: http://foxed.ca/foxed/index.php?page=rx7manual

 

I think you have to unbolt the flexplate from the round thing. (whatever that thing is called between the transmission and the engine . . . . )

You can get access to the bolts through the covers.

 

yes this is right... i'ts not hard to do 3 14mm bolts iirc. it will spill some trany fluid when you pull it off.