1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Removing Back Seats

Thread Tools
 
Search this Thread
 
Old 05-14-07, 05:22 PM
  #1  
Newbie
Thread Starter
 
garracudda's Avatar
 
Join Date: May 2007
Location: Vernon, BC, Canada
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Removing Back Seats

Hey. Trying to remove the back seats from my '83. I know it's probably a piece of cake, but so far it's mission impossible. So far I have pulled 2 nuts on each the left and right side, underneath the front of the back seat. Now I'm puzzled..
Old 05-14-07, 05:46 PM
  #2  
Newbie
Thread Starter
 
garracudda's Avatar
 
Join Date: May 2007
Location: Vernon, BC, Canada
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
^^ I removed two nuts in total, not 2 on each side that makes 4.
Old 05-14-07, 07:42 PM
  #3  
add to cart

 
Manntis's Avatar
 
Join Date: Jun 2002
Location: Saskatoon, SK & Montreal, PQ
Posts: 4,180
Likes: 0
Received 0 Likes on 0 Posts
most of us have North American cars without back seats, so advice on this one might be slim pickins. hopefully an Aussie will chime in...
Old 05-14-07, 08:34 PM
  #4  
Rotary Freak

iTrader: (2)
 
j_tso's Avatar
 
Join Date: Dec 2004
Location: Austin, TX
Posts: 1,757
Received 249 Likes on 167 Posts
and once you do get them out someone here will want to buy them.
Old 05-14-07, 08:42 PM
  #5  
Old Fart Young at Heart

iTrader: (6)
 
trochoid's Avatar
 
Join Date: Apr 2004
Location: St Joe MO
Posts: 15,145
Likes: 0
Received 7 Likes on 7 Posts
Assuming they are the same as the 2nd gen seats, and I believe they are. There are 2 bolts that pass through metal wire loops in the back of the seat bottom. To complete removal of the lower part, push down/back on the front edge of the seat to release the hooks. The seat back bolts can then be accessed to complete removal.
Old 05-14-07, 10:52 PM
  #6  
add to cart

 
Manntis's Avatar
 
Join Date: Jun 2002
Location: Saskatoon, SK & Montreal, PQ
Posts: 4,180
Likes: 0
Received 0 Likes on 0 Posts
^ listen to Trochoid. When it pertains to our cars; if he doesn't know the answer, there is no answer.
Old 05-15-07, 12:38 AM
  #7  
Lives on the Forum

iTrader: (5)
 
84stock's Avatar
 
Join Date: Apr 2003
Location: calgary
Posts: 5,537
Likes: 0
Received 9 Likes on 5 Posts
There are 2 bolts under the back of the seat (like under each outermost butt cheek). very tough to reach, you'll barely get your hand and a wrench in there.
Old 05-15-07, 10:40 AM
  #8  
Newbie
Thread Starter
 
garracudda's Avatar
 
Join Date: May 2007
Location: Vernon, BC, Canada
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Thanks guys, I think I've figured it out. Keep your eyes out on ebay, I probably will be selling them. I will let everyone know ahead of time.
Old 05-15-07, 02:28 PM
  #9  
whaa

 
7SpringsMisfit's Avatar
 
Join Date: Oct 2006
Location: Sewickley, PA
Posts: 433
Likes: 0
Received 0 Likes on 0 Posts
pics?
Old 09-18-10, 03:07 PM
  #10  
Almost not rotarded

iTrader: (6)
 
JoeNoble's Avatar
 
Join Date: Oct 2005
Location: Troy, Missouri
Posts: 961
Likes: 0
Received 0 Likes on 0 Posts
K so I tried pushing down and back on the front of the seat and got nothin. Is there a certain place I should be pushin?
Old 09-18-10, 06:15 PM
  #11  
its supposed to do that

 
flight_of_pain's Avatar
 
Join Date: Jan 2003
Location: PNW
Posts: 1,352
Likes: 0
Received 2 Likes on 2 Posts
Most of the aftermarket rear seats have bolts behind the seat back, if you fold the rear down you should be able to see them.
Old 09-18-10, 06:20 PM
  #12  
Almost not rotarded

iTrader: (6)
 
JoeNoble's Avatar
 
Join Date: Oct 2005
Location: Troy, Missouri
Posts: 961
Likes: 0
Received 0 Likes on 0 Posts
damn ok ill have to look for that next time thanks
Old 09-18-10, 09:38 PM
  #13  
Migrant Rotorhead

iTrader: (1)
 
Viich's Avatar
 
Join Date: Jul 2006
Location: Ottawa, ON
Posts: 240
Likes: 0
Received 0 Likes on 0 Posts
If you've got them out, want to sell them?
Old 09-19-10, 09:54 AM
  #14  
Almost not rotarded

iTrader: (6)
 
JoeNoble's Avatar
 
Join Date: Oct 2005
Location: Troy, Missouri
Posts: 961
Likes: 0
Received 0 Likes on 0 Posts
nope gotta put them in my daily driven 7 so my kids can ride in it to
Old 09-21-10, 01:44 AM
  #15  
Can You Wankel?

iTrader: (12)
 
Rx Seven's Avatar
 
Join Date: Sep 2005
Location: Bay Area
Posts: 1,040
Received 1 Like on 1 Post
I removed a rear seat from a junkyard that bolted through the cross member. If you haven't already, remove the piece of carpet that is covering the front of the cross member, then shine a light through the whole and see if there is a nut there or some type of hook. I also remember removing a bolt or a nut from each of the rear tire wells but I"m not sure if these attached to the seat or the seat belts for the rear seats.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
02-26-19 02:04 AM
Leeroy_25
3rd Generation Specific (1993-2002)
4
08-17-15 12:53 PM



Quick Reply: Removing Back Seats



All times are GMT -5. The time now is 09:51 AM.