i would like to get the Bönez racing system but would like to hear your opinions on which header/gaskets and muffler to use to complete the system.

or which setup would be compatable

thanks

 

1.
Would a Power Pulse Muffler bolt onto the Bönez racing system along witha Streetable Header/Collector or would i need a Power Pulse Presilencer?

2.
Would that work?

3.
what flanges and gaskets should I use throughout the exhaust system?

 

i would really appreciate any type of input on this subject so my car doesnt sounds like **** anymore

...

 

will somebodyat least give me a yes or no?

why be so inconsiderate?

 

First of all, I think its more of the fact that people dont know rather that them being inconsiderate.

Secondly, I dont really know either, but heres my educated guesses as well as thoughts.

No, I dont think this will work. The Bonez pipe is meant to bolt to the stock manifold which is shorter than a RB header, so if you tried to bolt it to a RB header, it would be too long to bolt to the RB muffler...I think.
Pretty much I answered that above .
Use the stock Mazda replacement exhaust gasket. Theyre sold through RB as well as MazdaTrix and all kinds of other retailers. The flanges on the exhaust system are the same regardless of who makes the exhaust, this is so they can use the stock Mazda gaskets.

From the sounds of it, I think that since youre already dropping the cash for a RB header and muffler, just drop the cash for the full exhaust system. It includes all the instructions and gaskets you will need, plus the RB products have proven to be reliable for almost quite litterly longer than the life of the car. My RB system is on its second car now, and still in excellent shape.

I hope that helps you out.

~T.J.

 

whats the complete exhaust setup most every uses..

headers manifold everything to the muffler.

whats combindable?

 

ok, well 1st off, you should know that the "bonez" muffler from rx7.com and the "power pulse" muffler from RB are the same peice. I had one of each on my two -SE's.

Now how it's set is either of the "muffler" or cat-back systems will bolt up to the stock connecting pipe. The RB single system (header + pre-silencer) will directly replace the stock setup as well. The RB dual system is not interchangeable with any other parts (and if you're looking for the *best* that's the ticket)

other questions?