I am trying to put together my front disks but it seems Im missing something the rear bearing doesnt have anything to seat up against. I didnt disassemble the old ones nor did I keep them. so im lost. I could get pictures but hope its an easy quick thing that I didnt know. Thanks for the help.

 

The rotor comes bare. The bearings are made of a tapered seat and the tapered cone. Tapered seat is pressed into the rotor so the cone has something to sit on.

On the inner bearing (closest to the spindle) there will also be a grease seal pressed in after the bearing is inserted.

Hope this helps.

-billy

 

not sure what u mean. in the rotor or on the spindle? the outside of the bearing runs against the race in the rotor.

edit: billy got in before me. maybe u mean u missed putting in the seal and the bearing keeps falling out while trying to put the rotor back up on the spindle?

 

I will have to take a picture b/c Im not sure how to explain.

 

well im out of town for the week so I cant get pictures until I get back... But let me try to explain one more time. On the rotor the smaller bearing fits on the front fine but the rear bearing the larger one that goes in the rear doesnt have a smooth surface to ride on. It looks as if something is missing? and if its installed on the spindle it doesnt even ride on the rear bearing. Hope that makes it alittle clearer.

 

http://z.about.com/d/autorepair/1/0/...el-bearing.jpg

that's the best pic i can find showing how it all goes back together, you just need the grease seal then bearing, race pressed into rotor, stick it back on spindle. don't forget the grease.

 

by that last description, ur missing the bearing race for the back side of the rotor.

 

that sounds like it. so where do I buy some?