Rear Hatch Struts (with wiper)
#1
RX7GSL
Thread Starter
Join Date: Mar 2003
Location: MA
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Rear Hatch Struts (with wiper)
Hi,
Anyone used these before ? I found these on ebay. Seem like a good price.
http://cgi.ebay.com/ebaymotors/2-Rea...Q5fAccessories
Looks like some cutting of the old one and remove the wiring but you get a pair of them for $50.00.
Anyone used these before ? I found these on ebay. Seem like a good price.
http://cgi.ebay.com/ebaymotors/2-Rea...Q5fAccessories
Looks like some cutting of the old one and remove the wiring but you get a pair of them for $50.00.
#2
Out In the Barn
iTrader: (9)
One would work for the drivers side, but you need the one with the wiper parts for the passenger side. I had some good spare lifts and changed our the drivers side this last weekend. When it came to the passenger side, I found this style would not work. It has a disconnect for the wiper when the hatch is up.
#3
Full Member
Join Date: Sep 2005
Location: Pueblo, Colorado
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
IF MEMORY SERVES:
The only differences between with and without wiper is the... attachments... that come on the tube. The mounts on each side should remain the same, as the overall length and compressed length.
Amirite?
The only differences between with and without wiper is the... attachments... that come on the tube. The mounts on each side should remain the same, as the overall length and compressed length.
Amirite?
#4
RX HVN
iTrader: (2)
Strong Arm brand sold by NAPA has instructions on how to re-mount the OEM wiper harness/hardware on them, so its doable.
OR
do what I did and....*gag*... buy an OEM wiper strut/harness. "only" $187 when they were available.
haven't had the heart to dare use it....
Stu Aull
80GS
Alaska
OR
do what I did and....*gag*... buy an OEM wiper strut/harness. "only" $187 when they were available.
haven't had the heart to dare use it....
Stu Aull
80GS
Alaska
#6
Full Member
Join Date: Nov 2008
Location: London England
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
hatch struts
Here's my cheap fix - hope pic downloads- using 12 inch length former antenna flatten ends,drill holes and fit 2 x 10mm Terry clips using little split pins to each end,- a slim length of flat metal is better though . Cost -little or nought if bits lying around.
Sorry -system not allowing pic attachment !!!!!
Sorry -system not allowing pic attachment !!!!!