Racing Beat Holly Carb/intake
Thread Starter
Junior Member
Joined: Apr 2006
Posts: 43
Likes: 0
From: Nova Scotia, Canada
Racing Beat Holly Carb/intake
Can anyone tell me the proper jet sizes for this set up on a street ported 12A with the Racing Beat Holly/Intake/ headers.
The car seems to run extremly rich at low RPM's Any idea on what the proper Fuel /Air ratio should be? The car is at sea level. Do they traditionally run rich at low R.P.M's
Any help would be greatly appreciated?
Paul
The car seems to run extremly rich at low RPM's Any idea on what the proper Fuel /Air ratio should be? The car is at sea level. Do they traditionally run rich at low R.P.M's
Any help would be greatly appreciated?
Paul
I know from Racing Beat it comes with .050 jets, and they say run 6 psi. Also they put a Holley Plain Secondary Spring. Now that is just a starting point.
On mine .050 were WAY to much, I put in .048 and a light "yellow" secondary spring and got good response, up untill i got crap in the carb from old fuel lines. I took the carb apart and cleaned it and gettting ready to put it back on.
On mine .050 were WAY to much, I put in .048 and a light "yellow" secondary spring and got good response, up untill i got crap in the carb from old fuel lines. I took the carb apart and cleaned it and gettting ready to put it back on.
Joined: Dec 2006
Posts: 1,763
Likes: 0
From: bayamon pr, orlando fl, paterson nj
Originally Posted by 5 litre eater
Can anyone tell me the proper jet sizes for this set up on a street ported 12A with the Racing Beat Holly/Intake/ headers.
The car seems to run extremly rich at low RPM's Any idea on what the proper Fuel /Air ratio should be? The car is at sea level. Do they traditionally run rich at low R.P.M's
Any help would be greatly appreciated?
Paul
The car seems to run extremly rich at low RPM's Any idea on what the proper Fuel /Air ratio should be? The car is at sea level. Do they traditionally run rich at low R.P.M's
Any help would be greatly appreciated?
Paul
what size carb do you have ? if its a 600 cfm try some 65 and air should be @ about 2 1/2 turns front and rear , it also would not hurt to advance the timming a **** hair.
