Racing beat Holley question
#1
Junior Member
Thread Starter
Join Date: Jul 2005
Location: Lorette MB
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Racing beat Holley question
I just recently purchased a racing beat holley off ebay and I was wondering what connects to the two nipples that are circled in the picture. Also does anybody know where to purchase a mop rod for this setup?
It wouldnt let me upload my picture so heres the link to the ebay auction.
http://cgi.ebay.ca/ws/eBayISAPI.dll?...MEWA%3AIT&rd=1
you can see them on the first and second picture. One gold and the others silver.
Thanks adam
It wouldnt let me upload my picture so heres the link to the ebay auction.
http://cgi.ebay.ca/ws/eBayISAPI.dll?...MEWA%3AIT&rd=1
you can see them on the first and second picture. One gold and the others silver.
Thanks adam
Last edited by rx7adam; 03-18-06 at 12:43 PM. Reason: picture
#6
Moderator
iTrader: (2)
yes, the OMP line goes to the one on the float bowl. and i'm running no vacuum advance. also, check ur local auto parts store for vacuum type "T" fittings, the one i used to make the 2 lines off the OMP into 1 line up to the carb is actually in the shape of an "F", placed upside down down at the OMP. 2 short vac hoses off the OMP to the upside down "F" fitting, then one piece of hose up to the carb. very simple.
Thread
Thread Starter
Forum
Replies
Last Post
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM