question about brake pads
#1
Full Member
Thread Starter
Join Date: Jul 2006
Location: kansas city
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
question about brake pads
I have done some searching on 1st gen brake pads, and I couldn't find anything on, is it hard to install them by yourself??.....can you use everything shop tools????
Or would it just be way easer to take it some were and have them do it??
thanks for any help guys
Or would it just be way easer to take it some were and have them do it??
thanks for any help guys
#2
Famous Taillights
iTrader: (3)
Front pads are really easy. Just disconnect the 17mm bolt on the bottom if the caliper and rotate the caliper upward and remove the pads. You will need a clamp of some sort to compress the piston all the way back before putting the caliper back. Rears are a bit more complicated but there is a thread on here explaining it somewhere. Make sure you give your brakes a good pump before driving, first pump will go right to the floor
Thread
Thread Starter
Forum
Replies
Last Post
djritz
3rd Generation Specific (1993-2002)
2
08-25-15 02:46 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM
Frisky Arab
2nd Generation Specific (1986-1992)
13
08-18-15 05:30 PM