http://www.stickam.com/profile/redlineaudio


Take a look and watch us pull the engine.

 

Haha lets see some work

 

How many guys does it take to pull a 12a?

 

the kid in the beater needs to stop textn on his phone and start pulling the rusted exhaust bolts

 

Didn't know one needs to remove the rear wheels to pull the engine. Learn something ew everyday. Blipping the air gun frequently helps too, lol.

 

Rear was used in another car.

 

All done.

 

After time you can pull 12a's out at junkyards with no hoist like me

 

How much does a 12a weigh?

 

Bastard! I just tried to load it, you finished to fast. We could of had a beer together!

 

"After time you can pull 12a's out at junkyards with no hoist like me"

OK CJ, how do you do it? I don't have that fancy set up Matthew has and I need to pop two good 12As out of my back yard lawn ornaments in the next few weeks. I was going to put up some 4x4 posts, a cross member and use a come along to get it up above the engine bay. Then put some planks across the bay, lower the engine off the come along and it's all down hill from there. Any better idea?

And yes, how much does a 12A weigh, if you take off the accessories?

Nice work Matt, the real time video sets a new standard.

Ray

 

Its no feather weight.

 

I can pick one up and sorta walk with it, if someone is on the other end.

 

So about 200 lbs. It should be a piece of cake with a come along hung on some 4x4 posts and a cross member. It's off to home depot I go.

 

Two guys can pickup a bare engine. I suggest taking off everything if you want to do it by hand. A winch and tree limb will pull it right out.


Ray: the shop is nice but not really needed, Two jack stands in the yard works just fine.


I am glad people enjoyed the cam, I hope to get one setup perminate and announce a bit before we do stuff like this.

Next will be pulling the one in the wifes 83LE and then putting this one in it.