problem with carb or somthing
#1
Junior Member
Thread Starter
Join Date: Apr 2006
Location: Willows
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
problem with carb or somthing
hey maybe sombody could help ive got a 85 fb with a 12a and the carb or somthing wont open the throttle goes to a point then stops its not the cable unless the cable is stretching but it will open it feels like the secondaries arent opening but hey does anybody know what this could be
#2
Old Fart Young at Heart
iTrader: (6)
Since you are new, welcome to the forum and the 'Dark Side'
The following is a link to the FAQs at the beginning of the 1st gen section, Spend some time reading, searching, researching and familiarizing yourself with your car. Most questions that can be be asked and answered, have been. We now have 100 pages of threads from which to glean knowledge.
When you get stuck, ask.
As a partial answer to your question, the secondaries are vacuum operated and only open under load. If you are dying to see them open, take the hood off, park yourself on the fender and have a friend drive. Under hard acceleration, you should see them open up.
Yes. I'm being a smarts ***, don't take it personally, were a pretty decent bunch here and poke fun at each other and ourselves.
The following is a link to the FAQs at the beginning of the 1st gen section, Spend some time reading, searching, researching and familiarizing yourself with your car. Most questions that can be be asked and answered, have been. We now have 100 pages of threads from which to glean knowledge.
When you get stuck, ask.
As a partial answer to your question, the secondaries are vacuum operated and only open under load. If you are dying to see them open, take the hood off, park yourself on the fender and have a friend drive. Under hard acceleration, you should see them open up.
Yes. I'm being a smarts ***, don't take it personally, were a pretty decent bunch here and poke fun at each other and ourselves.
#4
Lorem ipsum dolor sit ame
Originally Posted by trochoid
If you are dying to see them open, take the hood off, park yourself on the fender and have a friend drive. Under hard acceleration, you should see them open up.
Welcome n00b.
#5
Lives on the Forum
Anybody else wondering if his "teeter totter" thingamajig has flipped over? Have you been working around the throttle linkage on the carb lately? There is a part that will sometimes flip over and changes the way that the throttle works. Resistance will be hard, and performance will be down.
There are photos of this on Carl's website, but I can't find the linky for it.... Somebody clarify what my drunk mind is trying to relay to this guy...
There are photos of this on Carl's website, but I can't find the linky for it.... Somebody clarify what my drunk mind is trying to relay to this guy...
#6
Lives on the Forum
Okay, I just experienced a moment of lucidity... Here is the link and some more details.
https://www.rx7club.com/showthread.p...=teeter+totter
Sounds like this is your issue, but be sure to post back and let us know if this works or not.
Welcome to the club! The knowledge of thousands is now at your fingertips...
https://www.rx7club.com/showthread.p...=teeter+totter
Sounds like this is your issue, but be sure to post back and let us know if this works or not.
Welcome to the club! The knowledge of thousands is now at your fingertips...
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
imitek
3rd Generation Specific (1993-2002)
24
12-01-15 03:35 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM