1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Power Window Problem

Thread Tools
 
Search this Thread
 
Old Jun 29, 2003 | 09:11 PM
  #1  
Trackless's Avatar
Thread Starter
Newbie
 
Joined: Jun 2003
Posts: 2
Likes: 0
From: San Jose, CA
Power Window Problem

I just got an 85 Rx-7 and the power windows are not working very well, the passenger side goes up about half way only and the driver side i have to go up and down for a while and it goes up really slowly

any suggestions on how i can fix this myself
Reply
Old Jun 29, 2003 | 09:50 PM
  #2  
enigma32's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 686
Likes: 0
From: Central New York
I pulled off the door panels on the inside and sprayed some WD-40 on the drive gears and such....
Helped a bunch.

Silicon spray would be another good way to go
Reply
Old Jun 29, 2003 | 10:07 PM
  #3  
specRX7_22's Avatar
Rotary Enthusiast
Tenured Member 05 Years
 
Joined: Nov 2002
Posts: 1,013
Likes: 0
From: Eastern PA
well it sounds like the passenger side came off the track. just pull the door panel and put it back on from the front. if it happens again, theres a screw which holds the track in place, and can be moved right to make it closer to the glass.
Reply




All times are GMT -5. The time now is 03:19 PM.