Power Window Center Console Switch
#1
Senior Member
Thread Starter
Power Window Center Console Switch
Now that the motor is in I'm moving on to the center console switch.
There is no continuity when terminal 'F' is involved in a test.
Does this mean toss the entire switch and get another?
If yes, anyone have a burgundy power window center console switch?
There is no continuity when terminal 'F' is involved in a test.
Does this mean toss the entire switch and get another?
If yes, anyone have a burgundy power window center console switch?
#2
Full Member
iTrader: (1)
I would think the switch is bad.....
But double check continuity between a/f when pressing the switch up and check the other switch to make sure it’s not backwards or something, or upside down.
Whoever molested mine In the past put them in upside down in my car, then I plugged them in backwards and had no idea what was going on... at first
But double check continuity between a/f when pressing the switch up and check the other switch to make sure it’s not backwards or something, or upside down.
Whoever molested mine In the past put them in upside down in my car, then I plugged them in backwards and had no idea what was going on... at first
Last edited by LEGALIZECHEY; 11-20-20 at 08:48 AM.
#3
Senior Member
Thread Starter
You are a wizard, sir (or ma'am).
Late into the night I decided to try one more thing...do the test while pushing the buttons.
Walla, continuity on 'F'!
So, does this mean the switch is good...please, please, please say yes.🤣
Late into the night I decided to try one more thing...do the test while pushing the buttons.
Walla, continuity on 'F'!
So, does this mean the switch is good...please, please, please say yes.🤣
The following users liked this post:
LEGALIZECHEY (11-20-20)
#4
Rotary Enthusiast
Yes, for the up and down continuity tests, you need to actuate the buttons as described. Per your chart: push left side control up and the continuity should exist between a-f and also b-e. push left side control down and you should see continuity with b-e and c-f.
Edit: Should add, if you do find missing continuity, don't throw the switch away, just fix it. They are plastic press fit together and come apart easily for inspection and reconditioning. Here's what my 83 switches look like inside, you just clean up the burned contact points.
https://www.rx7club.com/1st-generati...tches-1138178/
and consider the power window relay upgrade wich vastly reduced the current handled by the switches, relegating it to relays which are better suited and easily replaceable.
Edit: Should add, if you do find missing continuity, don't throw the switch away, just fix it. They are plastic press fit together and come apart easily for inspection and reconditioning. Here's what my 83 switches look like inside, you just clean up the burned contact points.
https://www.rx7club.com/1st-generati...tches-1138178/
and consider the power window relay upgrade wich vastly reduced the current handled by the switches, relegating it to relays which are better suited and easily replaceable.
Last edited by Toruki; 11-20-20 at 09:56 AM.
The following users liked this post:
LEGALIZECHEY (11-20-20)
#5
Senior Member
Thread Starter
Yeah, I didn't get that from my read of the manual.
I just thought I'd try pushing the buttons...but, didn't know if it was a good thing or not.
Looks like the switch is good, brother.
Right on!✊🏾
I just thought I'd try pushing the buttons...but, didn't know if it was a good thing or not.
Looks like the switch is good, brother.
Right on!✊🏾
The following users liked this post:
LEGALIZECHEY (11-20-20)
Thread
Thread Starter
Forum
Replies
Last Post
hyperion
3rd Generation Specific (1993-2002)
1
11-07-07 09:30 PM
Whizbang
2nd Generation Specific (1986-1992)
3
03-22-05 08:50 PM