Post Your Interior Pics!
Originally posted by FBDrifter
FBDrifter, On a side note:
Your Shoulder harness should be connected directly behind you, and not on the floor.
The way you have it, it will compress your spine in an accident - real bad.
Full Member
Joined: Aug 2003
Posts: 67
Likes: 0
From: Los Angeles
not my interior
http://homepage3.nifty.com/22cworks/...g/25260022.JPG
i realy like those rims... n the hood... n the flares...
http://homepage3.nifty.com/22cworks/kakuta.jpg
http://homepage3.nifty.com/22cworks/...g/25260022.JPG
i realy like those rims... n the hood... n the flares...
http://homepage3.nifty.com/22cworks/kakuta.jpg
Senior Member
Joined: Oct 2003
Posts: 320
Likes: 0
From: warner robins, Georgia
so ur sayin u have to have some kind of roll bar to attach the harness to or its not safe??? something im bout to be doing and i dont want the death of my family/friend/girlfriend to be my fault so please let me know
Originally posted by rx7anator
so ur sayin u have to have some kind of roll bar to attach the harness to or its not safe??? something im bout to be doing and i dont want the death of my family/friend/girlfriend to be my fault so please let me know
so ur sayin u have to have some kind of roll bar to attach the harness to or its not safe??? something im bout to be doing and i dont want the death of my family/friend/girlfriend to be my fault so please let me know
Here's a look at my new gauges . Also here's a link to my car .http://members.cardomain.com/codeblue2 I have been Getting ready for ABF. so i have been doing lot's of cleaning ...you Guys have some very nice Interiors
your kidding right ? i have not got it yet...still waiting for it to come ...........I sent in the pictures they wanted ....then no one ever got back to me ....Hmmmmm
you must be kidding
you must be kidding
Last edited by CODE BLUE; Apr 14, 2004 at 12:48 AM.
they said they would notify people that made it in the magazine. I never recieved anything saying it did...ha ha
When did you get your copies? I subscribed and havent recieved any yet.
Can you scan the page....sounds too good to be true.
When did you get your copies? I subscribed and havent recieved any yet.
Can you scan the page....sounds too good to be true.
Originally posted by Directfreak
not necessarily a roll bar, but the should harness should be as close to shoulder height as possible. On the floor so low is NOT good. It's better to attach it all the way in the back of the hatch if you have no choice.
not necessarily a roll bar, but the should harness should be as close to shoulder height as possible. On the floor so low is NOT good. It's better to attach it all the way in the back of the hatch if you have no choice.
Originally posted by bizarro
wow...you guys are in a league of your own!...here is a pic of mine...
...almost done with the new head unit...beyond that is stock look
wow...you guys are in a league of your own!...here is a pic of mine...
...almost done with the new head unit...beyond that is stock look
the double whammy is that the wiring makes even less sense in the porsche and there's like 4x as much of it.
Here's some 20 year old stock brown in good shape:
http://images.cardomain.com/member_i...957_6_full.jpg
http://images.cardomain.com/member_i...9/479957_7.jpg
http://images.cardomain.com/member_i...57_14_full.jpg
Ray
http://images.cardomain.com/member_i...957_6_full.jpg
http://images.cardomain.com/member_i...9/479957_7.jpg
http://images.cardomain.com/member_i...57_14_full.jpg
Ray
Full Member
Joined: Feb 2003
Posts: 58
Likes: 0
From: North Wales, UK
Mine looks fairly ordinary compared with some of the really exotic photos on here (1982 Savanna Rx-7 LSD Special Edn).
The rest of the photos are at:
http://savanna.rx-7.co.uk
Best wishes from Wales
Frank
The rest of the photos are at:
http://savanna.rx-7.co.uk
Best wishes from Wales
Frank
Last edited by Savanna82; Apr 14, 2004 at 01:28 PM.
Originally posted by cpt_gloval
haha that's pretty much a huge pain in the *** in a car as small as a 7. try troubleshooting wiring under the dash of an EVEN SMALLER and '75 porsche 914 the double whammy is that the wiring makes even less sense in the porsche and there's like 4x as much of it.
haha that's pretty much a huge pain in the *** in a car as small as a 7. try troubleshooting wiring under the dash of an EVEN SMALLER and '75 porsche 914
the double whammy is that the wiring makes even less sense in the porsche and there's like 4x as much of it.
A few years ago:
Now:
Except that there's an '84 tranny in there now, so the shifter is further back. Obviously the boot plate doesn't fit any more, so I'm making an aluminum one.
driver's area:
Custom pedal covers:
Realized that I should have digitized the "RX-7" logo and used it under the "Mazda" logo after everything was done...
Speaker pod:
Door panel upholstery needs work...
Rear speakers:
Needs new carpet.
Now:
Except that there's an '84 tranny in there now, so the shifter is further back. Obviously the boot plate doesn't fit any more, so I'm making an aluminum one.
driver's area:
Custom pedal covers:
Realized that I should have digitized the "RX-7" logo and used it under the "Mazda" logo after everything was done...
Speaker pod:
Door panel upholstery needs work...
Rear speakers:
Needs new carpet.
Dang, that diamond plate's pretty sweet!
Um, I see the amp, so where's the head? Or is that an ignition or something?
Where's the AC controls?
How'd you cut the stuff? It looks pretty clean.
You need a tougher-looking steering wheel to go with the diamond plate, though...
somethin like http://www.grantproducts.com/grant.fm$retrieve?seqnum=123107&html=grantdetail
or http://www.grantproducts.com/grant.fm$retrieve?seqnum=123171&html=grantdetail
or http://www.grantproducts.com/grant.fm$retrieve?seqnum=122982&html=grantdetail
or you're favorite Sparco. Something with billet aluminum would be nice to go with the plate.
Um, I see the amp, so where's the head? Or is that an ignition or something?
Where's the AC controls?
How'd you cut the stuff? It looks pretty clean.
You need a tougher-looking steering wheel to go with the diamond plate, though...
somethin like http://www.grantproducts.com/grant.fm$retrieve?seqnum=123107&html=grantdetail
or http://www.grantproducts.com/grant.fm$retrieve?seqnum=123171&html=grantdetail
or http://www.grantproducts.com/grant.fm$retrieve?seqnum=122982&html=grantdetail
or you're favorite Sparco. Something with billet aluminum would be nice to go with the plate.