porting template question
#1
Full Member
Thread Starter
Join Date: Jan 2004
Location: north carolina
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
porting template question
i am going to port a 6-port out of a 87 rx to put in my gsl-se. i was wondering does any one have a printable template? if not would it be hard to make a template to print off? i have never ported a motor before and don't realy know which port will be the best. with the little reserch i have done it looks like an extended port is a good choise. i don't want a crazy set up. something with about 200 streetable whp. any other input would be good.
#2
here is some help here.
http://www.mazdatrix.com/faq/porting.htm
and you should use a nice quality template from mazdatrix also that goes onto the dowel pins and doesn't move. not some piece of paper.
http://www.mazdatrix.com/toolport.htm
carl.
http://www.mazdatrix.com/faq/porting.htm
and you should use a nice quality template from mazdatrix also that goes onto the dowel pins and doesn't move. not some piece of paper.
http://www.mazdatrix.com/toolport.htm
carl.