which port to use?????
03-25-08, 08:34 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: oakdale, california
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
which port to use?????
i have a 85 gs 12a and this car is going to be a street/Strip car and a weekend car. but im not really to sure which port i should consider doing.i was thinking a bridge but im afraid a brige might be too much. if i could get some opinions that would be great.
03-27-08, 12:31 AM
#5
FB+FC=F-ME
A half bridge will be modestly more powerful on the midrange,but good for quite a bit up top......Id guess 40 or so HP at the peak?(which is 40% over a stock 12A,provided the right mods accompany it)
A streetport can be anything you want it to be,it all depends on how far you go.A mild streetport is little more than cleaning up the rough edges and castings.Whereas a super wild streetport can brap and be as hard to drive as some bridgeports.
The half bridge,while a comprimise in some regards,is designed to offer the best of both worlds......the lowend and idle quality of a street,but some of the topend kick of a full bridge.
A streetport can be anything you want it to be,it all depends on how far you go.A mild streetport is little more than cleaning up the rough edges and castings.Whereas a super wild streetport can brap and be as hard to drive as some bridgeports.
The half bridge,while a comprimise in some regards,is designed to offer the best of both worlds......the lowend and idle quality of a street,but some of the topend kick of a full bridge.
Thread
Thread Starter
Forum
Replies
Last Post