Hey folks. Today, while changing out my oil metering lines amongst other things, I was looking at my carb(which I don't know much about). I know that the secondaries are vaccum operated unless you converted to mechanical. But I'm not aware if mine are or not......When my car is off, shouldn't the flap be horizontal? I guess I'm really wanting to see an overhead pic of an 85 carb, just to see if anything looks different. I searched the site, but all I found were a bunch of photos point out the a/f screw, lol......Any help would be appreciated, thanks.

 

Well if you mean the rectangular flap at the top of the carb, thats the choke. There were spme pics on here that I think 82transam did on a mech sec writeup. I

 

well....the manual says to push the throttle in all the way to be sure the primary was opening all the way, if not, then to adjust my cable.....

 

^^^hey chad did you get the new oil cooler line on yet?

 

hell yeah

 

Yes, look past the rectangular choke with a flashlight and see if the 2 small butterflies open all the way 90* with the throttle at WOT.

 

lmao....okay, I was looking at the wrong thing.....use to EFI, lol....Thanks Carl....Marcello, all my cell later....I'm going to the dragstrip on Friday and Saturday.....I'll be at bennigan's thursday night too....