Im trying to stream line the carb. taking off any thing that not truely needed. anyone have any pics that they have taken of the nikki with most or all the stuff off.

Thanks
Sean

 

There was one posted on here a while back, I've got it on my comp somewhere I'm sure, but alas, my webspace is down for the summer (damn college...).

Check the 1st gen archive, or this section with a search to try and come up with iht, if you haven't already tried it. It would seem to me that the archive would probably have it's thread somewhere.

For sure, right off the bat, I can tell you that you don't need the #2AAB, and you don't need the thing directly opposite it on the driver's side of the carb that has a black dohnut shaped top that takes a vacuum hose, and a hook coming out of the bottom... (forgive my technical terms )

I'd also check some of the rotary websites to try and find clues... Paul Yaw's, or Felix's... I can't say I personally have found anything on them, but I barely have had time to read them in their entirety.

Jon

 

Here's one:

 

Stuber Carb (Aus) http://users.tpg.com.au/sturach/stuber.htm

YAW Carb http://personal.riverusers.com/~yawpower/crbdtls.html

 

is it just me.. or SHOULDNT that be a stock picture.. thats ******* pretty