so i have an issue. i was pissed off and started working on my car. i was cleaning up the un needed wires. well some of the needed ones accidentally got cut. i am so pissed at myself. the connector that i cut off is the connector that goes to all the engine stuff oil pressure ect. that whole little harness i believe there is like 5-8 wires on it. the connection piont is on the passenger side near the firewall. it isnt the large plug thank goodness, but i think its either 6 or 8 wires on the plug i cant rem for sure i am currently not able to look at the car/connector. i cut the wires out all the way to where my coils are on the drivers side and i am having trouble figuring out what color wires are what. if any one could tell me the colors that would be awesome. i looked in my haynes manual and the fsm wiring diagrams and it seems to not show that particular harness anywhere. i even jumped on mitchell and looked at the diagrams on there and found nothing. please help. i am at a salvageable point where i could even still use a oem connector if i could just figure out the proper wire colors. my engine doesnt run so there is no way of trying to start it to see if it affects the running ability. pleaase helppp.

 

year model and engine would help to identify what harness you are refering to

 

oops sorry its an 85 with the 12a engine i believe its a base model

 

not sure how to edit my post but i have included needed info

 

"Measure twice, cut once."

Good luck, sir. You can get your wiring diagram from Sgt Fox's website - ought to help you a lot.

http://rx7.foxed.ca

 

those diagrams dont tell me the color of that harness. i have a haynes as well and looked through it multiple times. also through mitchell and all data all i need is for someone too look under their hood