ok, I won an intake adaptor and cone filter on ebay, now where's the writeup?
#1
finally back in an RX-7!!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Northern New Jersey
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
ok, I won an intake adaptor and cone filter on ebay, now where's the writeup?
hey all, I won
http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MEWN:IT
that earlier today for my 84 gsl-se. I thought I rememberd somebody else doing a writeup on how to make a good heat shield for a cone filter intake. I did a search and couldn't find a link. Anybody have any links for a good writeup on how to install both the filter and heat shield? Thanks!
http://cgi.ebay.com/ebaymotors/ws/eB...e=STRK:MEWN:IT
that earlier today for my 84 gsl-se. I thought I rememberd somebody else doing a writeup on how to make a good heat shield for a cone filter intake. I did a search and couldn't find a link. Anybody have any links for a good writeup on how to install both the filter and heat shield? Thanks!
#5
Senior Member
Join Date: Nov 2004
Location: South Cali, Glendale
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
...ten bucks.....
This your first ebay win? lol...
Do what they said. Bolt it on. Common sense. It's like putting to gether legos. Remember that when you were small?...
This your first ebay win? lol...
Do what they said. Bolt it on. Common sense. It's like putting to gether legos. Remember that when you were small?...
#6
Rollin' coal and 53mpg!
Originally Posted by 84stock
Bolt it up, yeah. But then find a way to support the afm since it was supported by the airbox. If your hoping for the hot sound of a honda cai you won't find it with this, you'll need a weber.
It's true... my 48IDA was ******* CRAZY loud.
#7
I bought the same adaptor a spectre one from auto zone. I used a K&N filter tho. I attached a pic of the install, you do have to support the AFM. I just used a bolt and useda stock hanger, you can see it right under the little orange thing by my strut bar. You will also need a filter for your air pump, another spectre cheapo since it does not really matter.
Trending Topics
#8
finally back in an RX-7!!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Northern New Jersey
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
ok, 84stock... i'm not looking for any real increase, I just thought it would be fun.
d0 luck, thanks for being so helpful... *sarcasm*
turboFB, no, it was not my first e-bay win, and as a matter of fact, i was going to get just the adaptor and then a k&n filter, but my money is low, so i figured that $20 shipped for a filter and an adaptor really isn't bad. and no, it is not like legos, there is no plastic in involved. it is similar to other toys, like constructor sets, but not legos. so if you are going to attempt to be a comedian, at least use a proper insult, thanks
john64, i like that pic, but you don't have a heat shield? As far as the filter for the air pump, where did you get it? autozone? (right now I don't even use my air pump though, it's just pumping into nothing b/c i have a removed cat, so i don't need to worry about it now, but i will be getting a new exhaust system that will allow me to properly use the 5th and 6th port actuators, not just have them wired open)
I had really posted this intending to get help on how to fabricate a heat shield (like, where to mount it) also, I know some of you guys use pipe to redirect more air into the intake. anybody have pix of how they did this?
longduck, i seem to remember you having a similar setup, if you see this, think you could add some input?
thanks guys
d0 luck, thanks for being so helpful... *sarcasm*
turboFB, no, it was not my first e-bay win, and as a matter of fact, i was going to get just the adaptor and then a k&n filter, but my money is low, so i figured that $20 shipped for a filter and an adaptor really isn't bad. and no, it is not like legos, there is no plastic in involved. it is similar to other toys, like constructor sets, but not legos. so if you are going to attempt to be a comedian, at least use a proper insult, thanks
john64, i like that pic, but you don't have a heat shield? As far as the filter for the air pump, where did you get it? autozone? (right now I don't even use my air pump though, it's just pumping into nothing b/c i have a removed cat, so i don't need to worry about it now, but i will be getting a new exhaust system that will allow me to properly use the 5th and 6th port actuators, not just have them wired open)
I had really posted this intending to get help on how to fabricate a heat shield (like, where to mount it) also, I know some of you guys use pipe to redirect more air into the intake. anybody have pix of how they did this?
longduck, i seem to remember you having a similar setup, if you see this, think you could add some input?
thanks guys
#10
Savanna Rx-7
Damm (.)
Originally Posted by TurboFB
But it IS like legos....just snap the filter right onto it. Why make things so complicated, young one?
kenn
#11
finally back in an RX-7!!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Northern New Jersey
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
i'm really not trying to beat anybody, I just basically want it to look cool, and be somewhat functional as i know cool air is much better than the rediculously hot engine air. ::puts on flame suit::
#12
Savanna Rx-7
and he pounces!
Originally Posted by kiker14
i'm really not trying to beat anybody, I just basically want it to look cool, and be somewhat functional as i know cool air is much better than the rediculously hot engine air. ::puts on flame suit::
dammit I thougth I smelled rice like I said, just rattling your chain a bit, lol
kenn
#13
finally back in an RX-7!!
Thread Starter
iTrader: (1)
Join Date: Jun 2003
Location: Northern New Jersey
Posts: 847
Likes: 0
Received 0 Likes
on
0 Posts
heh, well, a lot of us college folks here don't really have the money to do any ::real:: modification, but in a few years, I'll have my 3rd gen, and I won't rest till i'm putting out 400hp
1.5 years left till I'm done with college, then i'll have my b.s. in computer science and business with a specialization in marketing and business information systems
i will hopefully make enough money then to do REAL mods. Till then, I'm going to stick to some "visual mods" and modding my x-box
1.5 years left till I'm done with college, then i'll have my b.s. in computer science and business with a specialization in marketing and business information systems
i will hopefully make enough money then to do REAL mods. Till then, I'm going to stick to some "visual mods" and modding my x-box
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM