Oil Pressure Sensor Wiring.
#1
Rockin' the suburbs!
Thread Starter
Join Date: May 2006
Location: Dayton, Ohio
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Oil Pressure Sensor Wiring.
Okay, does the oil pressure sensor only have one wire coming off of it? Mine is a yellow wire attached via a plastic connector with a metal tab inside that has what looks like the head of a nail sticking out. It's kind of loose. I'm assuming it needs to be tight?
My car sometimes shows a little bit of oil pressure but not a lot. Then other times it doesn't at all.
Now on the other hand there is a brown wire right near there coming off of the same wire wrap(of the wiring harness) the oil temp sensor comes off of that has a black wrap around one end like something plugs into it but for the life of me I can't find anything for it to connect to.
My car sometimes shows a little bit of oil pressure but not a lot. Then other times it doesn't at all.
Now on the other hand there is a brown wire right near there coming off of the same wire wrap(of the wiring harness) the oil temp sensor comes off of that has a black wrap around one end like something plugs into it but for the life of me I can't find anything for it to connect to.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
stickmantijuana
20B Forum
8
08-18-15 02:46 PM