OdD QuesTions aNd idEaAs
Thread Starter
Smile Like a Donut
Joined: Feb 2004
Posts: 1,236
Likes: 0
From: Don't you wish you knew....
OdD QuesTions aNd idEaAs
Ok this is for the people who don't know to ask they're questions.
Ok now I was wondering about something for awhile now. Would there be any reason to put some hold down pins on the hood? Now I'm talking about up closer to the windshield, not closer to the bumper.
On another note, got the new bumper installed and damn s all I have to say. Sounds so nice. Not like AAHH!! Like the last bumper but rrrrrrmmmm. And the other muffler I kept onto and am gonna rip apart if the kid doesn't want it who I told I'd give to. Hey it's split in half.
Ok now I was wondering about something for awhile now. Would there be any reason to put some hold down pins on the hood? Now I'm talking about up closer to the windshield, not closer to the bumper.
On another note, got the new bumper installed and damn s all I have to say. Sounds so nice. Not like AAHH!! Like the last bumper but rrrrrrmmmm. And the other muffler I kept onto and am gonna rip apart if the kid doesn't want it who I told I'd give to. Hey it's split in half.
Originally Posted by YapaKanichi
On another note, got the new bumper installed and damn s all I have to say. Sounds so nice. Not like AAHH!! Like the last bumper but rrrrrrmmmm. And the other muffler I kept onto and am gonna rip apart if the kid doesn't want it who I told I'd give to. Hey it's split in half.
My BUMPER doesn't make any of those noises.
Trending Topics
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
lol...
Speaking of silly questions, I had a friend the other day try to say that I didn't have to worry about locking my doors because "nobody knows how to hotwire a rotary engine anyway"
Silly Ray, what a nut he is sometimes.
Jon
Speaking of silly questions, I had a friend the other day try to say that I didn't have to worry about locking my doors because "nobody knows how to hotwire a rotary engine anyway"
Silly Ray, what a nut he is sometimes.
Jon
1983 GSL, 1987 323 "GX"
Joined: Jun 2004
Posts: 2,265
Likes: 0
From: Las Cruces, NM
I remember getting into a fist fight with a friend because he didn't beleive that an engine could run without pistons +_+
How many cylinders is it?
NONE?
TELL ME, DAMNIT!
IT DOESNT HAVE CYLINDERS!
IT HAS TO, IDIOT!
FINE, IT HAS TWO!
it CANT have two.
Punch, punch, bleed, continue
How many cylinders is it?
NONE?
TELL ME, DAMNIT!
IT DOESNT HAVE CYLINDERS!
IT HAS TO, IDIOT!
FINE, IT HAS TWO!
it CANT have two.
Punch, punch, bleed, continue
Yeah, shutup kid.
Joined: Mar 2002
Posts: 1,686
Likes: 2
From: Columbus, OH
No need for pins. I've had my car up to 120 with the hood not even latched 
It lifts up about 2"-3" at most, and won't go any higher than that. If it's latched the corners near the windshield will shake a bit, but I've had it up to 160 and it was fine.
It lifts up about 2"-3" at most, and won't go any higher than that. If it's latched the corners near the windshield will shake a bit, but I've had it up to 160 and it was fine.
Suicidal Death Missile
Joined: Mar 2004
Posts: 1,782
Likes: 0
From: Newport News, Virginia
Hood pins are normally used for rear hinged cars. At high speeds, the hoods tended to lift off the car. I suppose enough pressure COULD build up underneath the hood, but not likely. Just put in vents like the Z06 uses behind the wheels, that'll lower the underhood pressure, and drop the temp down a bit too.
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM