1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

noob question?

Thread Tools
 
Search this Thread
 
Old 03-22-07, 04:33 PM
  #1  
Full Member
Thread Starter
 
black79's Avatar
 
Join Date: Nov 2006
Location: New Brunswick, Canada
Posts: 187
Likes: 0
Received 0 Likes on 0 Posts
noob question?

I have searched alot and found lots of useful info about doing my TII swap, but a lot of the info is about putting a 13BTII into an FB. I have an SA and I'm not sure what is the same and what is different in the swap between the 2 cars. Any info would be great.
Old 03-22-07, 05:52 PM
  #2  
Lives on the Forum

iTrader: (13)
 
Rx-7Doctor's Avatar
 
Join Date: Jul 2004
Location: Oregon
Posts: 10,584
Likes: 0
Received 11 Likes on 10 Posts
Everything is the same as the Fb swap except if you are using a FB trans or a TII trans the shifter tunnel will need to modified as the Sa trans shifter sits closer to the firewall than the FB or FC. If yours is a late model Sa then there is a write up about swapping the tailshaft housings over with the shift rods to the FB trans. Do not know about the TII trans.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
05-25-21 05:37 AM
whinin
Introduce yourself
17
03-30-19 07:53 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
RXeckless
3rd Generation Specific (1993-2002)
4
09-12-15 04:52 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
09-05-15 02:13 PM



Quick Reply: noob question?



All times are GMT -5. The time now is 09:30 PM.