I have looked every where and can not find any info on how to mod a nikki carb for turbo so what i am tryn to find out is what is needed for the mod i already have all my parts for my turbo setup just need to know how to mod the carb first time running a turbo through a carb

 

not sure how its done but you can buy a nikki preped carb from rotaryshack.com for about $200 iirc

 

Good luck on getting that info. I finally ended up selling all my turbo parts as I could not afford the whole job the right way.

I remember reading that based upon all of the R & D involved the only way to get your carb turbo preped right was to send it off to the pro's and they were not sharing the information because of all of the research and development time put into identifying all of the things that would need to be done.

It hurst... but it's understandable... at least we have some people with the knowledge.

 

You can turbo anything if its properly setup and tuned. http://www.youtube.com/watch?v=PNG6JRoqXu8 BTW, welcome and hit me up sometime if you need any help with your setup.

 

^ +1