1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

New possible gsl-se. let me know what you guys think..PICS TOO!!

Thread Tools
 
Search this Thread
 
Old 05-17-05, 05:29 PM
  #1  
Senior Member

Thread Starter
 
boog's Avatar
 
Join Date: Jan 2004
Location: las vegas
Posts: 597
Likes: 0
Received 0 Likes on 0 Posts
New possible gsl-se. let me know what you guys think..PICS TOO!!

i already have a perfectly good GS(WITH A LOT OF RUST, BUMMER) but i found this. The only dings are a couple on the back, not too bad. No rust, YES but there is 180,000 miles!! I never got to meet the actual owner to find out if the motor was rebuilt. It idled, ummmm not very well. It was really jumpy and the speedo no worky. It seemed to run well though and clutch felt perfect. Wow the 13b is a big jump from 12a(stock at least) I would not pay 1100 for this car, i was thinking like 800, what do you think? I want to swap in my interior and some other stuff here and there cause it has a faded red interior(ugly, in my opinion) oh yeah get this, THERE ARE HOLES DRILLED IN THE REAR WHEELS WELLS WITH BOLTS STICKING INWARD WITH NUTS ON THEM. is this normal? I have about a thousand in the bank so i could buy the car and sell mine after some swapping for a llittle more money. It would be my daily driver i am only 18 with no job yet!!!!
Attached Thumbnails New possible gsl-se. let me know what you guys think..PICS TOO!!-se1.jpg   New possible gsl-se. let me know what you guys think..PICS TOO!!-se.jpg   New possible gsl-se. let me know what you guys think..PICS TOO!!-se2.jpg  
Old 05-17-05, 05:54 PM
  #2  
sprayfoam autobody expert

 
tempusfugitive's Avatar
 
Join Date: Jul 2004
Location: Fergus Ontario
Posts: 366
Likes: 0
Received 0 Likes on 0 Posts
looks kinda rough, the bolts in the rear wheel wells are probably a cheapo rust fix. but if you can get it for 6-700 i'd buy it.
Old 05-17-05, 06:27 PM
  #3  
Full Member

 
RotaryRocket85's Avatar
 
Join Date: Nov 2004
Location: Atlanta Ga
Posts: 177
Likes: 0
Received 0 Likes on 0 Posts
the lenses are gone too...
Old 05-17-05, 06:57 PM
  #4  
Senior Member

Thread Starter
 
boog's Avatar
 
Join Date: Jan 2004
Location: las vegas
Posts: 597
Likes: 0
Received 0 Likes on 0 Posts
yeah, do you think that sounds good for around 700? This guy knows his stuff but doesnt do his own engine work. Oil is dripping from and a little around the drain plug. If its not a major leak like in the block or somethin it's not bad because mine leaks to.(rear main seal) Im going down tom. to look at it more with a friend who has an se just like this with a streetport.........................
Old 05-17-05, 07:38 PM
  #5  
7 Lover

 
thekyl's Avatar
 
Join Date: Jan 2005
Location: Vancouver, WA
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
Not too bad if you can get it for 500 that would be a pretty good car to work with deffinatly check for rust in the bin area and in the wheel wells.
Old 05-17-05, 07:46 PM
  #6  
Rotary Enthusiast

 
web777's Avatar
 
Join Date: Mar 2003
Location: LOS ANGELES
Posts: 1,228
Likes: 0
Received 0 Likes on 0 Posts
I saw this car on Ebay a couple months ago. Was thinking of looking at it.
Old 05-17-05, 08:34 PM
  #7  
cjf
Rotary Enthusiast

iTrader: (1)
 
cjf's Avatar
 
Join Date: Jul 2001
Location: NORTH CAROLINA
Posts: 1,059
Likes: 0
Received 0 Likes on 0 Posts
yeah , I agree ...looks rough...you buy it for 700.00 ...then you gotta throw 1000 at it to get it up to snuff...I'd look else where......cjf...looks like a parts car to me...
Old 05-17-05, 09:23 PM
  #8  
Shell 93

iTrader: (4)
 
kevinbtz's Avatar
 
Join Date: Jun 2004
Location: Little Rock, Arkansas
Posts: 1,019
Received 20 Likes on 11 Posts
500 tops......you will be kicking your self in two months when you find a clean one for 1,300.
Old 05-17-05, 10:36 PM
  #9  
JKM

 
JKM's Avatar
 
Join Date: Oct 2003
Location: Burlington, NC
Posts: 1,341
Likes: 0
Received 6 Likes on 2 Posts
I dunno, it's a GSLSE which is a bit harder to find than other models.

I would say it's worth the 1100 since there were people wanting to pay $800 for mine when I thought it was dead and needed to be towed away. However, I'd say $800 would be a good price for it myself.
Old 05-17-05, 11:47 PM
  #10  
Shell 93

iTrader: (4)
 
kevinbtz's Avatar
 
Join Date: Jun 2004
Location: Little Rock, Arkansas
Posts: 1,019
Received 20 Likes on 11 Posts
I paid only 700 for mine 2 weeks ago. 105,000 miles very clean interior and decent outside. All that was wrong was a bad leading igniter, so I swap the leading and trailing igniters, then drove it away here are some pics...about a half a page down https://www.rx7club.com/1st-generation-specific-1979-1985-18/fmic-almost-done-421516/page2/
Old 05-17-05, 11:52 PM
  #11  
Banned. I got OWNED!!!
 
TurboSE's Avatar
 
Join Date: Mar 2005
Location: SF CALI
Posts: 564
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by kevinbtz
500 tops......you will be kicking your self in two months when you find a clean one for 1,300.
Old 05-18-05, 12:01 AM
  #12  
Shell 93

iTrader: (4)
 
kevinbtz's Avatar
 
Join Date: Jun 2004
Location: Little Rock, Arkansas
Posts: 1,019
Received 20 Likes on 11 Posts
Originally Posted by TurboSE

Hey, I am just saying that you can find a beter deal than $1,100 for a SE with 180,000 miles that needs at least a good paint job, spedo fixed, some rust repair, some engin work and a interior swap.
Old 05-18-05, 01:06 AM
  #13  
Banned. I got OWNED!!!
 
FB II's Avatar
 
Join Date: Dec 2002
Location: wishing i was back in FL
Posts: 4,192
Likes: 0
Received 0 Likes on 0 Posts



and wow, our cars really do not look good in flat black glad mine are white!
Old 05-18-05, 02:52 AM
  #14  
So little time and money

 
1984special's Avatar
 
Join Date: Feb 2003
Location: NorCAL
Posts: 746
Likes: 0
Received 0 Likes on 0 Posts
I'm gonna have to agree with everyone and say that is a really rough -se. There are plenty of them out there and 1k is way too much to drop on one that has major problems. Offer him a couple hundred and see if he takes it. You dont' want ot buy something that will just cause problems down the road.

HTH
Old 05-18-05, 04:40 PM
  #15  
Shell 93

iTrader: (4)
 
kevinbtz's Avatar
 
Join Date: Jun 2004
Location: Little Rock, Arkansas
Posts: 1,019
Received 20 Likes on 11 Posts
yep
Old 05-18-05, 04:45 PM
  #16  
Senior Member

Thread Starter
 
boog's Avatar
 
Join Date: Jan 2004
Location: las vegas
Posts: 597
Likes: 0
Received 0 Likes on 0 Posts
ok, im letting it go, thanks guys. The owner wants 1000 and nothing less
Old 05-20-05, 06:01 PM
  #17  
84SE-EGI helpy-helperton

 
LongDuck's Avatar
 
Join Date: Oct 2002
Location: Phoenix, AZ
Posts: 3,314
Received 359 Likes on 250 Posts
$1000 and nothing less?

Give him your number, tell him you'll bring him cash. Money talks... (you know the rest).
Old 05-20-05, 07:33 PM
  #18  
Senior Member

 
speedracer_not's Avatar
 
Join Date: Dec 2004
Location: alabamer
Posts: 502
Likes: 0
Received 1 Like on 1 Post
$1000 would be fair if the metal behind the storage bins was perfect. Remove the storage bins and check. I'll bet $1000 that there is a major problem there!
Old 05-20-05, 09:07 PM
  #19  
Senior Member

Thread Starter
 
boog's Avatar
 
Join Date: Jan 2004
Location: las vegas
Posts: 597
Likes: 0
Received 0 Likes on 0 Posts
No rust i could see, but there are some holes drilled through the wheel wells with light shining through along with some giant bolts with nuts on them. Whoever buys the car, is going to have a few surprises if they dont know first gens fairly well. It seemed to run decent............oh yeah, do all gsl-se's have a really stiff clutch pedal, it seems like it or maybe its just an upgraded clutch....god bless
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tylerx7fb
1st Generation Specific (1979-1985)
39
05-27-19 12:45 PM
Clacor
Single Turbo RX-7's
0
08-14-15 09:17 AM



Quick Reply: New possible gsl-se. let me know what you guys think..PICS TOO!!



All times are GMT -5. The time now is 04:53 AM.