rx-7_cbr929

So about a month or so ago maybe a little longer, I got my beloved 7 back from Mississippi (i was pretty excited). Well on the down side it still had a froze up wankel. So i figured rebuild... But the money situation wasnt working out. Then I found a nice immigrant that would sell me a 12a for $300. Well I got it... it seems to have good compression looked it over quite well all seems EXTREMLY good for 300. gona do small things like swap water pumps little things.

Now to the questions, any advice or recomendations or "you better make sure you .... before you ....'s?"

One big question the motor I recieved does "NOT" have a distributer I need advice about installing the one from my old motor to the new one thank you

Any help greatly appreciated!!!

trochoid

iTrader: (6)

Wackyracer has a pictoral 'How To' in the archives for finding TDC. Find that, try it out, if you you have problems, ask more questions. If you don'r have a caopy of the FSM, download on frm one of the following links.

http://www.wankel.net/~krwright/cars/rx7/manuals.html

http://foxed.ca/foxed/index.php?page=rx7manual