charlie1

Just received my new Crane PS-20 coils to replace my old stock coils on my 85 13b. Is this just a direct replacement, nothing special to do?
Thanks

scott_06

Yup, just make sure you connect the + correctly and the neg correctly. Really easy. I just did mine.

charlie1

+,- Do you mean the in and out, sorry for the dumb question?

scott_06

No your fine, You have a total of three wires going to each coil. One wire is the positive, the other is the neg and hen you have the wire that goes to the coil to the cap on the dissy. You will see a + and - markings on the coil. The positive wires will have that rubber cover on them..

scott_06

also, the bolts on the coil pack dont need to be really tight. They are easy to break off, so be carful while you tight the bolt on the wires. I just bearly snug them on ther

charlie1

Thanks Scott