new clutch,what do you think?
#1
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Hannibal MO
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
new clutch,what do you think?
Just put this new setup in my 83. Grabs like mad. Anyone have any experience with this type of clutch? It's brass and ceramic
#3
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Hannibal MO
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
No. I used the stock flywheel but I had it resurfaced. There is no ridding this clutch either. I can barley move on the ice but I get a good third now. It will put you back in the seat for a minute.
#6
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Hannibal MO
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
None yet but I wanted to get a this now rather than a stock clutch which I needed anyway. I have soem big plans for a high HP motor and I wanted to get the whole clutch thing figured out now. But i realize this is WAY more than I need right now. It's just plain stupid how well it grabs!
Trending Topics
#9
RX for fun
iTrader: (13)
Re: new clutch,what do you think?
Originally posted by brianw
Just put this new setup in my 83. Grabs like mad. Anyone have any experience with this type of clutch? It's brass and ceramic
Just put this new setup in my 83. Grabs like mad. Anyone have any experience with this type of clutch? It's brass and ceramic
nice. im using a 4 puck with 3500 lbs pressure plate in my daily driver RX-3. Wish I didnt the same in my son's FB. I used a 6-puck instead of a 4-puck. But, i will change it once I meet the 1,000 miles break-in period.
#10
Right near Malloy
iTrader: (28)
Join Date: Dec 1999
Location: Behind a workbench, repairing FC Electronics.
Posts: 7,846
Received 512 Likes
on
347 Posts
Re: Re: new clutch,what do you think?
Why is a 4 puck clutch used for racing where a round clutch is used for street?
Logic would say, more surface area = More grip...
Perhaps I'm missing something... Why cut chunks outta something that could be round?
Logic would say, more surface area = More grip...
Perhaps I'm missing something... Why cut chunks outta something that could be round?
#11
I Push My Car Real Fast!
Join Date: Jan 2003
Location: Riverside CA
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
i have a similar clutch. 4 puck solid, thing grips like no other.
im going to put it on my TII motor when it goes in.. i have no idea how im going to controle it with a 12lb flywheel.
im going to put it on my TII motor when it goes in.. i have no idea how im going to controle it with a 12lb flywheel.
#12
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Hannibal MO
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Well I blew this one. My freind told me the donor clutch,flywheel,and pressure plate he had was to a 83 but I think now that it was off a 82. This would ex[plian the vibration I now have. The question I now have is while I know that I have to use my 83 flywheel can I use the 82 clutch and pressure plate on my 83 flywheel?
#13
Senior Member
Thread Starter
Join Date: Nov 2003
Location: Hannibal MO
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Just found out that I can't use any of this so it's for sale. pm or email with an offer if you're interested in buying it.I have to try and get some of my money back so I can have the right one built now.
Thread
Thread Starter
Forum
Replies
Last Post