needing help please
#1
Junior Member
Thread Starter
Join Date: Apr 2005
Location: nm
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
needing help please
i was wondering if any one has any ides on how to get my 84 rx-7 running again? it dont seem to be getting spark i have replaced the ingition colis and even replaced the plug wires but yet i still cant seem to get any spark i have ben tracing wires and power and it gets power to tht distributer but no spark any idea would be greatly appriciated.
#4
Lives on the Forum
There are two "ignitors" (ignition modules) mounted on the exterior of the dizzy. One for leading spark (lower plugs) and one for trailing (top plugs). If you are only lacking spark on the leading or the trailing (not both) then chances are its the ignitor. These are very expensive new, but can be found cheap at junkyards or on Ebay.
#5
blown up motors
iTrader: (1)
Originally Posted by Kentetsu
There are two "ignitors" (ignition modules) mounted on the exterior of the dizzy. One for leading spark (lower plugs) and one for trailing (top plugs). If you are only lacking spark on the leading or the trailing (not both) then chances are its the ignitor. These are very expensive new, but can be found cheap at junkyards or on Ebay.
<-----------or cheep right here i have a few sets layin around if that is your problem lol or if any1 else needs some
#6
Junior Member
Thread Starter
Join Date: Apr 2005
Location: nm
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
yea the car was running before and then just died on me out of no where i replaced the coils and then it started rite up again. but then i dorve it for like 40 min and it died again doing the same thing.
the plugs are new and yes it does seem like it is trying to turn over but nothing just crankes and crankes.
the plugs are new and yes it does seem like it is trying to turn over but nothing just crankes and crankes.
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM