In need of parts! Fuel pickup/return assembly
#1
Newbie
Thread Starter
In need of parts! Fuel pickup/return assembly
Been searching for this part and unable
to locate. Any suggestions? Attached is a
pic of our current one and the one we
need. Thanks for any help or suggestions. (‘85 , 12a fuel tank)
The one we need
The old one from fuel tank
to locate. Any suggestions? Attached is a
pic of our current one and the one we
need. Thanks for any help or suggestions. (‘85 , 12a fuel tank)
The one we need
The old one from fuel tank
Last edited by Marvin-Alexis Lopez; 09-26-20 at 03:47 PM.
#3
Out In the Barn
iTrader: (9)
New ones can be bought here. I would not trust the lifespan of a used one.
https://www.atkinsrotary.com/store/8...54-60-960.html
https://www.atkinsrotary.com/store/8...54-60-960.html
Last edited by KansasCityREPU; 09-27-20 at 10:52 AM.
#4
Slowly getting there...
iTrader: (1)
That link's for the level-sensor. OP is looking for the pickup/return assembly. He shows both in his crusty used pile, but he says he's looking for the pickup/return. I looked through Atkins and MTrix but they onlu have the tanks, gaskets, fill tubes and the level sensor you linked. No pickups.
#5
Out In the Barn
iTrader: (9)
That link's for the level-sensor. OP is looking for the pickup/return assembly. He shows both in his crusty used pile, but he says he's looking for the pickup/return. I looked through Atkins and MTrix but they onlu have the tanks, gaskets, fill tubes and the level sensor you linked. No pickups.
Thread
Thread Starter
Forum
Replies
Last Post
Directfreak
1st Gen Archive
70
01-04-03 09:45 AM