Need Help from someone who has NOT removed their rats nest and has Cruise Control
Need Help from someone who has NOT removed their rats nest and has Cruise Control
Me and my buddy where rippin down my engine bay and I didnt mark the relay in the rats nest that controls the vacuum to the cruise control unit.
So what I need is to know which relay it is "what color is the clip that goes to it"
and...
Does the vacuum line comming out from the side go to the unit or the one from the bottom.
and......
which spot on the intake does the other vacuum line plug into.
thanks
So what I need is to know which relay it is "what color is the clip that goes to it"
and...
Does the vacuum line comming out from the side go to the unit or the one from the bottom.
and......
which spot on the intake does the other vacuum line plug into.
thanks
that's correct. there is no solenoid in the rats nest controlling it. Inside the actuator itself it's a different story though. But for the purpose of your question, you just need a vacuum line connected to it.
Originally posted by cdrad51
none of the solenoids in the rats nest are for the cruise control, if that is what you're asking. a vacuum hose goes from the rats nest to the cruise control unit, that's it.
none of the solenoids in the rats nest are for the cruise control, if that is what you're asking. a vacuum hose goes from the rats nest to the cruise control unit, that's it.
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
Aug 26, 2015 09:52 PM
12abridgeport
1st Generation Specific (1979-1985)
2
Aug 17, 2015 06:28 PM



