I purchased a nice distribution block, to replace the fusible link since I replaced the battery cables ect. I need help figuring out what amp fuse to replace each stock fusible link. My father and I tried to convert what the manuel says each fuse can hold, but I'd feel alot better double checking with you guys. I have an 85 gsl-se with FI intact still. So what I'm asking is what amp fuse for the following:
Headlight
Computer
Injectors
Headlight motors
Main

I've been looking everywhere to get a certain answer, I just dont want to fry stuff up.
Thanks.

 

use a 2nd gen fuse block, its a simple swap that takes 15 minutes.

 

Heres my 2nd gen conversion.

Here are your values:
EFan: 20amp
Headlights: 30amp
Main Fuse: 80amp I have an 80amp 2nd Gen Alternator
Retractors: 30amp
Computer: 30amp
Injectors: 40amp
One open for expansion.

 

Main is 60, other 2 are 30

 

Well thank you, you guys told me what I needed to know. I already have all custom battery cables because I didnt have the patience for parts stores around here. Every thing is ready to put together, I just needed to know what fuses. Thanks!

 

No problem, any time!