need help droping the dizzy in
#1
Full Member
Thread Starter
Join Date: Sep 2007
Location: bristol CT 06010
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
need help droping the dizzy in
ok i am new to these motors and never droped in a dizzy on one of these.
what marks on the Eshaft pully do i have lines up were do i have waht parts of the rotor in the dizzy pointing?
can some on give me a quick walk threw on dropin this dizzy so it is "top dead center"
its a 12a out in a in my mazda b2200 truck
what marks on the Eshaft pully do i have lines up were do i have waht parts of the rotor in the dizzy pointing?
can some on give me a quick walk threw on dropin this dizzy so it is "top dead center"
its a 12a out in a in my mazda b2200 truck
#2
Stu-Tron Get Yo Groove On
iTrader: (4)
On the passenger side of the engine bay, near the back of the engine/transmission should be an inspection plate you can remove with 2 12mm bolts (iirc). take that off, and shine a light in there at the flywheel. Line the flat side of the flywheel with the flat side of the passenger side engine. You now have top dead center.
Make sure you align the dot and dash at the bottom of the dizzy before you drop it in.
Make sure you align the dot and dash at the bottom of the dizzy before you drop it in.