I bought everything i needed the clutch master cylinder . Goodridge hardline . The metal hard line that comes from the master cylinder. Plus the master cylinder pump. I will like to know whats the easiest way to bleed the clutch pump thanks .

 

these cars are just about the easiest thing on the planet to bleed. if you're lucky, you can pump the pedal a lot and it'll bleed itself.
if you're not, stand next to the car on the driver side. i use an 8mm socket on a long extension, and you can push the pedal and reach the socket at the same time...

 

iI's like the brakes. Attach a clear hose to the clutch slave bleeder that is in a 16oz pop bottle 1/4 filled with DOT 3/4 brake fluid. Have someone pump the clutch pedal a few times, hold to floor, open bleeder on slave to let air escape. Close bleeder. Repeat till no more air and firm peddle. While doing this, don't let the clutch master run low on fluid.