Need an explanation
#1
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Edmonton AB Canada
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Need an explanation
WTF does this mean. It is on the RB website.
"With the exception of the 1976-78 RX-3 and the 1979-85 RX-7 engines, this kit increases engine output by approximately 20 HP with the stock exhaust system and approximately 40 hp with open headers."
Do they or anyone else know what the HP increase i could see with a stock port 81. After removing emissions.
"With the exception of the 1976-78 RX-3 and the 1979-85 RX-7 engines, this kit increases engine output by approximately 20 HP with the stock exhaust system and approximately 40 hp with open headers."
Do they or anyone else know what the HP increase i could see with a stock port 81. After removing emissions.
#2
Rotary Enthusiast
Join Date: Nov 2002
Location: Eastern PA
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
I have no idea why they're making those exceptions, but they are saying with headers the exhaust will have bigger increase than having the exhaust without headers. That is completely understandable considering the stock manifold is the biggest restrictor. They mentioned nothing about ports, so I guess you cant assume they meant with stock ports.
#3
Senior Member
Thread Starter
Join Date: Aug 2002
Location: Edmonton AB Canada
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Its talking about having a Holley Intake Kit with the Exhaust. But I was just wondering if anyone knew the HP gains of just the intake and carb and with all 3. Is the 20 and 40 HP the same for an 81.
Thread
Thread Starter
Forum
Replies
Last Post