My new alternator
#1
Junior Member
Thread Starter
Join Date: Nov 2005
Location: Baltimore, MD
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
My new alternator
I put in my new alternator finally. It is a 86 - 88, 70a alternator. This alternator seems bigger and wider. I put it on and the part that the long bolt goes thru is wider. So there is room between the bracket and the end of the alternator. Do i need to fill that space with a bushing or washers? Or is it fine. Need answer please. It works fine though. Just curious if that space can be damaging.
#2
Super Moderator
iTrader: (3)
I would put some washers on there to fill in the space just to be safe. I think otherwise the alt may move in and out slightly. Probably wouldn't hurt anything major. May wear out the belt faster, though. I have an 89-91 alt on my SE and didn't need any extra spacers, but since my car is 13B, that is probably why. Congrats on the intall.
#3
http://pineappleracing.com/ sells a spacer for that.
Thread
Thread Starter
Forum
Replies
Last Post
Captain Hook
2nd Generation Specific (1986-1992)
13
10-04-15 06:35 PM