Im haven problems with my clutch, say if i put the pedal down in 3rd or 4th or 5th the engine will rev higher but i wont speed up with the rev, its like the clutch slips or something when i flore it. And I can't really power shift, if i drop the clutch with the pedal down the clutch wont disengage it will just keep sliping and the car will have no torque. I would have to let go of the gas to let the clutch engage then i would have to take it easy or it might slip again. What could be the problem???? And wil it be a costly fix?
Any suggestions on what i should do?

 

checked your fluid levels? sounds like you're due for a new clutch none the less..

 

its on the min line i should put it to max is that the problem thought i didnt think it would be because it was lower the the min line

 

Don't worry about the hydraulics for now. You need a new clutch.

 

maybe time to fill er up with some fluid. but yes, sounds like your clutch is toast for sure.

i got a cheap OEM clutch on ebay. you might want to look there to try and save some cashola!

g'luck

 

It was just like mine... and i need to replace the clutch... I think you need a new clutch... go on ebay

 

What do they go for on eBay? I got a Mazda clutch through Competition for $50 and I thought it was pricey.

 

I bought a exedy OEM clutch kit for $120 with shipping... It includes the pressure plate, disc, throw-out bearing, and alignment tool.

 

New Clutch, that is the exact same thing my old car did when it was going out, any gear I was in, if I gave it gas it would rev high then drop and catch up with itself. It also had a horrible smell along with that problem, but i ignored it until i couldn't shift anymore

 

I had the same "high rev" problem with my SE. I replaced the clutch, pressure plate, and throw out bearing and it's cured.

 

what do u guys suggest I do with my clutch situation. Should I by one brand knew or off ebay or something. And what kind should i get, i tend to ride my clutch a bit for spinnin the tires and stuff so i prob need somethin decently durable. Any suggestions on brand names or types that i should get and where i should persue for my 85 12 a gsl.??