my build with pics!
#1
you know you want this
Thread Starter
my build with pics!
and it was suppose to be a simple motor rebuild...
[
until i realized the frame looked like this
looked a little deeper, and found this behind the rear drivers side tire
so, i did what any logical person would do. i bought a rust free body and started to swap parts!!
thats all for now.
[
until i realized the frame looked like this
looked a little deeper, and found this behind the rear drivers side tire
so, i did what any logical person would do. i bought a rust free body and started to swap parts!!
thats all for now.
#4
you know you want this
Thread Starter
thanks for the comment. you are right about the springs, they were heated and dropped. i loved the stance it had, and the wheels tucked about 1/4" above the fender lips (top of the tire was hidden by the fender). i put the other springs on, but now i have about a 4" gap. the car is still pretty much stripped though, so maybe they will settle. if not, guess i'll have to get some coil overs whats the best way to get about a 1" gap all around?
#7
you know you want this
Thread Starter
Trending Topics
#8
you know you want this
Thread Starter
a few more pics
these cleaned up nice
the doors went on like this with no adjustment! rear end sits a bit high though...
the old car
kitteh likes the comptition!
me and codeblue goofing off on the way to ABF
my compitition (other codeblue cars)
more pics of the build this weekend!
the doors went on like this with no adjustment! rear end sits a bit high though...
the old car
kitteh likes the comptition!
me and codeblue goofing off on the way to ABF
my compitition (other codeblue cars)
more pics of the build this weekend!
#10
Post Pimp
iTrader: (1)
Join Date: May 2003
Location: Spokane valley, Washington
Posts: 2,800
Likes: 0
Received 0 Likes
on
0 Posts
yeah all my **** sits low....JR sit a little lower then blue, thats because jr has...
Eibach Springs, I think thats what you need to go with greg.
lets see what happens when we put more stuff in the car, it should sit a little lower. I think your gonna like this car much better. with the new motor setup, and the low end. oh yeah..............
Eibach Springs, I think thats what you need to go with greg.
lets see what happens when we put more stuff in the car, it should sit a little lower. I think your gonna like this car much better. with the new motor setup, and the low end. oh yeah..............
#11
you know you want this
Thread Starter
they worked good for the old look
but this build i want a real sleek and clean look. debadged, high gloss jet black, slight polished accents, red/black interior and engine. just a pure panty wetting sex machine
but this build i want a real sleek and clean look. debadged, high gloss jet black, slight polished accents, red/black interior and engine. just a pure panty wetting sex machine
Thread
Thread Starter
Forum
Replies
Last Post
Azevedo
Other Engine Conversions - non V-8
26
03-01-19 09:19 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM