More problems still
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Prescott Valley, AZ
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
More problems still
The top of my driver's side door wont seal or get close enough to keep the wind out. Does any have this problem? As of what i know I can't find a way to adjust it except for the door striker which doesn't help much. Also does anyone know an easy way to fix the headliner that is falling off the top rear? Thanks.
#4
Junior Member
Thread Starter
Join Date: Nov 2007
Location: Prescott Valley, AZ
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Well see thats the problem I just replaced the door seals and window channels. I looked at it and it is the frame. The black frame that holds the window channel. It doesn't close enough to keep the wind nosie out. I don't know how to fix it.
#5
just another joe
Join Date: Apr 2007
Location: Pascagoula, MS
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
just a sugestion, place a 2x4 inside the door from the outside and tweak the window frame twards the car. not a lot but just enough to create a better seal. i did it to mine and have no problems or side effects.
the reason i used a 2x4 to tweak the frame was the wind blew the door shut on my hand and the door wouldnt seal by my head, causing me to go crazy from wind buffeting.
the reason i used a 2x4 to tweak the frame was the wind blew the door shut on my hand and the door wouldnt seal by my head, causing me to go crazy from wind buffeting.
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM