Mallory FPR on a Nikki?
Thread Starter
Joined: Jul 2004
Posts: 524
Likes: 0
From: Windsor, Ontario
Mallory FPR on a Nikki?
Does anybody have pictures of a Mallory fuel pressure regulator on their Nikki? I'm just looking ot see how people set them up but I can't seem to find any pictures. I would appreciate the help, thanks!
Thread Starter
Joined: Jul 2004
Posts: 524
Likes: 0
From: Windsor, Ontario
It's this model http://www.malloryracing.com/Product...xtSearch=4309#
The General RE
Joined: Apr 2003
Posts: 924
Likes: 13
From: San Diego, CA
Here's the instructions:
http://static.summitracing.com/globa...s/maa-4309.pdf
You won't need the return on the carb anymore.
http://static.summitracing.com/globa...s/maa-4309.pdf
You won't need the return on the carb anymore.
Thread Starter
Joined: Jul 2004
Posts: 524
Likes: 0
From: Windsor, Ontario
It's this model http://www.malloryracing.com/Produc...txtSearch=4309#
The General RE
Joined: Apr 2003
Posts: 924
Likes: 13
From: San Diego, CA
Well you have a choice.
You can install it like figure 3b and not use the return port on the carb...or...
You can install it like figure 3c and place it on the return from the carb, essentially replacing that factory flow oriface.
Either way you will need some 1/4NPT plugs.
You can install it like figure 3b and not use the return port on the carb...or...
You can install it like figure 3c and place it on the return from the carb, essentially replacing that factory flow oriface.
Either way you will need some 1/4NPT plugs.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
