Finished installing this this weekend. I've heard of people putting pumps in the bin, as I did years ago...but they are noisy. As others have done in the past, on the other side of the bin is a perfect spot, you just have to move the stock fuel line a bit...as in remove the line brace at the bin area...the top one just needs to be loosened till finished.

This install used a stock fuel tank and line up to the filter.
Filter is a 10 buck Russel 40-mic job.
Pump, as mentioned, is a Mallory 110. VERY QUIET!!!! Barely heard without the radio off!!!....very much the opposite of Holley Red's, or even the Carter is a bit noisier.
-6 AN 90's with some left over braided hose.

Carb now has the fuel it needs and runs a shitload better.

yea...

 

sweet nice job yeah my carter is a noisey ***** evan with the radio on

 

are you using stock lines with the mallory? just fitted mine vertical on the chassis leg and gone 3/8 feed and return lines

 

I have my mallory comp 70 mounted in exactly the same spot. The only difference is I used rubber isolators and it is absolutely silent!