lugnut pattern 4x110..
#1
Junior Member
Thread Starter
Join Date: Mar 2001
Location: Arcadia, CA, USA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
lugnut pattern 4x110..
what measurement is that 110mm of? is it the distance between 2 holes across from each other? What is the SAE equivalent of 110mm? is it a straight conversion that comes out to something like 4.33 in.? And anyone know what the max backspacing would be on a stock 12a 1st gen?
TIA
TIA
#2
'Last Minute' Rallying
Join Date: May 2002
Location: Lincoln, England
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
110mm is the Pitch Circle Diameter
There for the diameter that the hole centres are aligned on is 110mm
so yes conversion to Imperial (not sure what you mean by SAE) is simply a matter of dividing by 25.4 to covert from millimeters to inches
There for the diameter that the hole centres are aligned on is 110mm
so yes conversion to Imperial (not sure what you mean by SAE) is simply a matter of dividing by 25.4 to covert from millimeters to inches
Last edited by MikeLMR; 03-18-03 at 01:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
NickNac113
1st Generation Specific (1979-1985)
13
10-01-15 09:25 PM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM