Murrayyy

can i get a list of everything i need for 13b s4 n/a into 85 gsl. please and thank you

19-r-e-d-79

iTrader: (1)

you will need a 12a or gsl-se-13b front cover, gsl-se oil pan, 13b header and oil pan,front cover gaskets.
oh and a distributor and carb set up.

you can use your 12a distributor.

74RX4

iTrader: (10)

http://fm.no-ip.com/Car/cartech.html#12A-2-13B

Murrayyy

thanks guys this really helped

Murrayyy

so what do i do for wiring then? im going to remove all possible emissions and omp.

74RX4

iTrader: (10)

Look at the 4th thread from the top of the main 1st gen page entitled 1st Gen RX-7 FAQ.

Search for the term 13b swap and you will find many threads. Here's a start.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/13b-s4-swap-into-my-85-gsl-849136/

84stock

iTrader: (5)

And gslse oil pick up too I believe

rotarydude

iTrader: (2)

Nope 12a pickup works just fine.

You will also have to modify the front engine bracket a little bit or get the conversion bracket from Racing Beat/Mazdatrix You can not use the bracket off a GSL-SE.

You will end up with a bunch of extra wiring that you will no longer need but your car is already wired for the distributor you will be using.

Also you will need to get an Oil cooler and lines to mount in front of the radiator the easiest one to use will be off a GSL-SE the easiest to find will be off a 79-82 Rx-7 the second can be used but you will have to fab up some brackets. For the first one your 85 chassis already has the provision for the oil cooler.

I am sure that there are things I am missing look at the mentioned threads

Jeezus

iTrader: (4)

Search button