just got a 83 rx7 (need some help)
#1
Full Member
Thread Starter
Join Date: Jun 2006
Location: biose idaho
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
just got a 83 rx7 (need some help)
well first you guys have an awesome site here. i need some info on my steering box.
I know i need to tighten it or mybe just replace all togeather. If i do adjust it im not sure what tools i need. also mybe a good website i might be able to buy a new one.
I cant seem to be able to find anything on my own so far. sp any help would be awesome look forward to posting here and talking to you all.
I know i need to tighten it or mybe just replace all togeather. If i do adjust it im not sure what tools i need. also mybe a good website i might be able to buy a new one.
I cant seem to be able to find anything on my own so far. sp any help would be awesome look forward to posting here and talking to you all.
#4
Old Fart Young at Heart
iTrader: (6)
Steering box is the last component to be touched. Make sure the tie rods, idler arm, ball joints and wheel bearings are up to par. If they are not, you will not be able to adjust the play out of the steering wheel, most likely over tighten the unit and accelerate the internal wear. Replacing the steering box is more expensive that all of the above listed components combined.