JDM 13B Turbo
Thread Starter
RX-7 Hunter
Joined: Aug 2008
Posts: 9
Likes: 0
From: Nova Scotia
JDM 13B Turbo
Hey, I have a quick noob question. I was wondering if this motor (http://www.japanmotorimport.com/JDM_...013B%20T_86-91) would fit in a 1985 GSL-SE
Any help would be great!
Any help would be great!
Yes.. have you tried the search button yet? It works wonders.
Here.. I'll help you. 13BT in to FB
Here.. I'll help you. 13BT in to FB
Joined: May 2002
Posts: 5,972
Likes: 37
From: Ottawa, Soviet Canuckistan
Kerebrus, searches time out, so giving a link to a search isn't that useful for people who pull this thread up in searches in the future.
Share what terms you searched for and a thread or two you came up with.
To the original poster, the short answer is that yes you can make that engine fit, but it's not a direct drop-in. The very basics are covered many times over in this section, like the fact that you'll need a 12a or GSL-SE front cover and a GSL-SE oil pan and pickup tube just to get the engine physically into your engine bay. The wiring will be hard but thankfully, starting with a GSL-SE is easier for that swap than starting with a 12a-powered FB.
Look around, check the FAQ, the Archive and hit up the search a couple of times and see if you can come up with some more specific questions regarding the swap and we'll see what we can do to help.
Jon
Share what terms you searched for and a thread or two you came up with.
To the original poster, the short answer is that yes you can make that engine fit, but it's not a direct drop-in. The very basics are covered many times over in this section, like the fact that you'll need a 12a or GSL-SE front cover and a GSL-SE oil pan and pickup tube just to get the engine physically into your engine bay. The wiring will be hard but thankfully, starting with a GSL-SE is easier for that swap than starting with a 12a-powered FB.
Look around, check the FAQ, the Archive and hit up the search a couple of times and see if you can come up with some more specific questions regarding the swap and we'll see what we can do to help.
Jon
Kerebrus, searches time out, so giving a link to a search isn't that useful for people who pull this thread up in searches in the future.
Share what terms you searched for and a thread or two you came up with.
To the original poster, the short answer is that yes you can make that engine fit, but it's not a direct drop-in. The very basics are covered many times over in this section, like the fact that you'll need a 12a or GSL-SE front cover and a GSL-SE oil pan and pickup tube just to get the engine physically into your engine bay. The wiring will be hard but thankfully, starting with a GSL-SE is easier for that swap than starting with a 12a-powered FB.
Look around, check the FAQ, the Archive and hit up the search a couple of times and see if you can come up with some more specific questions regarding the swap and we'll see what we can do to help.
Jon
Share what terms you searched for and a thread or two you came up with.
To the original poster, the short answer is that yes you can make that engine fit, but it's not a direct drop-in. The very basics are covered many times over in this section, like the fact that you'll need a 12a or GSL-SE front cover and a GSL-SE oil pan and pickup tube just to get the engine physically into your engine bay. The wiring will be hard but thankfully, starting with a GSL-SE is easier for that swap than starting with a 12a-powered FB.
Look around, check the FAQ, the Archive and hit up the search a couple of times and see if you can come up with some more specific questions regarding the swap and we'll see what we can do to help.
Jon
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM