1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

j.spl ROTA BUYERS!!!

Thread Tools
 
Search this Thread
 
Old Mar 17, 2006 | 07:44 PM
  #1  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
Arrow j.spl ROTA BUYERS!!!

I used "southernrunner" 's car, worked well for wheel pics, i dont want to steal from rotormotor, these threads are just to help all of us get organized, occup your(MY) minds while we wait for purchase, now go at it and make sure to say whether your in for these wheels or not.....these photoshopped pics are not the best i know......the toyota is not photoshopped(its the only car with those wheels)
The wheels were placed directly over 15'' kosie k-1's
Attached Thumbnails j.spl ROTA BUYERS!!!-12.jpg   j.spl ROTA BUYERS!!!-123.jpg   j.spl ROTA BUYERS!!!-234.jpg   j.spl ROTA BUYERS!!!-1234.jpg   j.spl ROTA BUYERS!!!-122.jpg  


Last edited by boog; Mar 17, 2006 at 07:53 PM.
Reply
Old Mar 17, 2006 | 08:09 PM
  #2  
ApG Spaz's Avatar
Gen 1 4 life
Tenured Member 05 Years
 
Joined: Jul 2004
Posts: 587
Likes: 0
From: Apalachin NY
prefer D2, but since thats not happening, im in for the 11 pound wonder wheel
Reply
Old Mar 17, 2006 | 08:25 PM
  #3  
Lt. Dan's Avatar
Rotary Enthusiast
Tenured Member 20 Years
 
Joined: Oct 2002
Posts: 1,418
Likes: 3
From: Fairfax, VA
I'm in like flynn
Reply
Old Mar 17, 2006 | 08:27 PM
  #4  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
+ 1
Reply
Old Mar 17, 2006 | 08:34 PM
  #5  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
most likely me because the gt3's are still seeming like a no go....i wonder what the price is at with like 8 of us?/
Reply
Old Mar 17, 2006 | 08:36 PM
  #6  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
Thinking about getting 5....spare and in case of damage.
Reply
Old Mar 17, 2006 | 09:20 PM
  #7  
boiler81's Avatar
84 GSL - 63K all original
Tenured Member 05 Years
 
Joined: Jan 2006
Posts: 48
Likes: 0
From: Sammamish, Washington
I'm already in for fully polished J.Spl . Yes the D2's are nice, and if they only came fully polished, I'd be in on those. I do love the 16"/17" wheel look.
Reply
Old Mar 17, 2006 | 09:55 PM
  #8  
candyassmiler's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 342
Likes: 0
From: burkesville, kentucky
im in..
Reply
Old Mar 17, 2006 | 10:01 PM
  #9  
rbf41182gt's Avatar
Rotary Enthusiast
Tenured Member: 20 Years
 
Joined: Jun 2004
Posts: 1,081
Likes: 2
From: Richmond, VA
do any of you want the GT-3's? I think we only need one more if boog changes his mind
Reply
Old Mar 17, 2006 | 11:43 PM
  #10  
Rotary Weasel's Avatar
Resident Weasel
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 566
Likes: 1
From: Reno, NV
I wonder if SE owners want in on this
Reply
Old Mar 18, 2006 | 12:03 AM
  #11  
candyassmiler's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Jul 2003
Posts: 342
Likes: 0
From: burkesville, kentucky
they have tons of options for wheels. lets knock out non se's first.
Reply
Old Mar 18, 2006 | 01:16 AM
  #12  
grifff's Avatar
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2005
Posts: 20
Likes: 0
From: cedar city
Im in for the fulling polished ones....they siad they have center caps those in your pics don't... I want to know for sure im getting center caps or i dont want emm
Reply
Old Mar 18, 2006 | 03:36 AM
  #13  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
most people dont sport the center caps, i saw some on a buddy's gt3 wheel a year ago and they were kinda ugly, stuck out an inch and a half(like old muscle car looK) but these may be different and that's just my opinion but the wheels are supposed to have them.

**here is another style we could ask for i found(just tell rotormotor i guess)
Attached Thumbnails j.spl ROTA BUYERS!!!-untitled.jpg  

Last edited by boog; Mar 18, 2006 at 03:40 AM.
Reply
Old Mar 18, 2006 | 02:26 PM
  #14  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
if we can get ten then shipping will be free, otherwise its 50 extra, let's just get this going man im excited and the following for this is crapping out..............lip will not change with our needed offset and our offset can be done....the kosei's are 1/2 inch wider and are +17, i figure that sounds good but we'll have to know for sure(ill do my homework on it if no one else wil)

TOTAL OF 7 ARE IN ON THIS WHEEL SO FAR(3 more needed, rotrmotr still needs to chime in also so maybe just 2 more are needed)
Reply
Old Mar 18, 2006 | 02:37 PM
  #15  
drunkclever's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Mar 2005
Posts: 697
Likes: 0
From: massachusetts
How much were they for the dark gray ones??? I think there sweet.. if the price is right i'm /:|

17's?

Last edited by drunkclever; Mar 18, 2006 at 02:49 PM.
Reply
Old Mar 18, 2006 | 02:50 PM
  #16  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
h dark gray ones? the j.spl on the left at the top? If it is the same wheel and we have enough people then the finish can be changed for free(we could all be diff. if we want) i wanted to see what it would look like fully polished so i did some more photoshop

the wheels all have to be the same size i think, unless you are willing to pay the extra, also rota only shows 15x6.5 for the size of this wheel
Attached Thumbnails j.spl ROTA BUYERS!!!-untitled1.jpg  

Last edited by boog; Mar 18, 2006 at 02:54 PM.
Reply
Old Mar 18, 2006 | 02:55 PM
  #17  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
Not bad, although I'd still prefer the dark gray personally.
Reply
Old Mar 18, 2006 | 02:59 PM
  #18  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
i like the dark gray, but all the wheels are dark in the center now, its like the new fad(in vegas) and i dont want to look like im following that...that's the only reason, maybe vegas is just diff. but i hate it cause ive always wanted two toned wheels like these oh well, at least we will get to look at eachother's wheels later and they wont all be the same
Reply
Old Mar 18, 2006 | 03:01 PM
  #19  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
My car is red so I want to offset that color and polished is too bling for me.
Reply
Old Mar 18, 2006 | 03:04 PM
  #20  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
oh i see, yeah your right, that would look sick....and shiny would be blingin, my car is dark so i want the wheels to show, post pics of your car and ill try to do a decent photoshop to it
Reply
Old Mar 18, 2006 | 04:22 PM
  #21  
Rotary Weasel's Avatar
Resident Weasel
Tenured Member 05 Years
 
Joined: Oct 2005
Posts: 566
Likes: 1
From: Reno, NV
Originally Posted by aussiesmg
My car is red so I want to offset that color and polished is too bling for me.
oh yeah, dark grey wheels with your red would look tight
good taste!
Reply
Old Mar 18, 2006 | 04:52 PM
  #22  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
im bored, and its not the best
Attached Thumbnails j.spl ROTA BUYERS!!!-untitled.jpg  
Reply
Old Mar 18, 2006 | 06:59 PM
  #23  
boog's Avatar
Thread Starter
Senior Member
Tenured Member 05 Years
 
Joined: Jan 2004
Posts: 597
Likes: 0
From: las vegas
ok guys, rota should be sending me a wheel or two to fit up to my car, i gave him the specs of our 13" stockers and a common offset for 7" wide wheels on 12a's....ill keep this going with updated info atleast once a day(prob. more)
Reply
Old Mar 18, 2006 | 09:08 PM
  #24  
aussiesmg's Avatar
Thunder from downunder
Tenured Member 10 Years
iTrader: (1)
 
Joined: Mar 2001
Posts: 3,843
Likes: 1
From: Convoy, Ohio, USA
Nice chop man, that's what I'd been hoping for. Oh and thanks weasel
Reply
Old Mar 19, 2006 | 02:34 AM
  #25  
smurfy RX3's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Nov 2005
Posts: 97
Likes: 0
From: NYC
I'm still interested, I'm partial to the polished finish though, it makes them look sort of like Mercedes AMG wheels... nice!!
Reply



All times are GMT -5. The time now is 11:47 AM.