warwickben

iTrader: (1)

well iam no tire expert ask me about bending tube/ pipe or welding i can help you out. i found the site and noticed it was for mazda 4x110 wheels. i figured id give it to you guys who are looking for wheels ect. i ll order a set when i have the cash and let you know how it goes.

kapn krunch

the only problem i see with the link is it says datsun and mazda rims. are they the same bolt pattren?

djjjr42

I've got the konig rewinds 15x7 with 20 mm offset and I have no clearance issues, nor do they poke out from the fenders.
I think I read a post about some clearance problems with the front springs with these on an SA though.

warwickben

iTrader: (1)

dam it sucks to be a sa guy like me i guess. if i have to ill figure some thing out.

since you have the 15 inch do u see any problems with a rim that big in ne, pot holes ect.

Slammed_GSL

iTrader: (14)

I use 15 inch and have not issues, just don't hit the potholes!
205/50/15 is good for the front, I use 225/50/15 on my rears, 15x8.5 Epsilons.

Really thinking about this new selection of wheels, Just need wider optins besides 15x7.

Wikid79Sa

iTrader: (3)

I have a 79 Sa and ran into clearance issues with the konig rewinds. I am either going to swap to the 81-85 strut tubes, or find out if the coilover kits give just enough room. I will resolve the issue and post pics.

It is good to see the wheel makers bringing more options to the table for us 4x110 guys.

Good find btw

warwickben

iTrader: (1)

could you use spacers to fix the problem. please keep me up dated.

Glazedham42

iTrader: (4)

I don't think that all of these rims are 4x110. I could be wrong, but when you click on the link for Mazda 4x110, it takes you directly to the Konig section of the website. Also, they sell ROH wheels, so why aren't the ROH Snyper's listed as a 4x110 compatible wheel??? Something isn't right here. I think that their website is incorrect about these rims....

RE Matsuda

^ I think you're right, it wouldn't make sense for Konig to offer their ENTIRE line of wheels with such an obscure bolt pattern. A lot of Konigs wheels are made only for FWD cars. Go to another place like 1010tires or discounttiredirect and you'll only see the RWD Rewinds have a 4x110 option. Sorry guys...

warwickben

iTrader: (1)

i sent the compy a email last night and this is what was in my mail box today.

-----Original Message-----
From: Ben Towle [mailto:warwickben@mac.com]
Sent: Tuesday, September 04, 2007 5:54 AM
To: info@jdwheels.com
Subject: info on 4x110

hi my name is Benjamin Towle, i was would like to know what wheels/rims you
have for mazda's with 4x110 bolt patten, and if you could tell me the off
-set ect, i couldn't find the offset on the web page .


(this is what they sent back to me)

All of that is right on the home page http://www.jdwheels.com/. You may
want to look at it again...it's all there.

Kim Dailey
www.JDWheels.com
800/379-5333

warwickben

iTrader: (1)

if some one that know more about wheel rims is willing to call them up and talk to them please do so and let us know. i would but i dont knwo all the questions to ask.

Rx-7Doctor

iTrader: (13)

This is what you need to send them.

I have a 1980 Mazda Rx-7 and am looking for some replacement wheels in a (Specify the rim diameter) What do you have to offer and what is the offset of the wheel?

Jeff20B

iTrader: (13)

That looks pretty good. What's your tire size?

Hades12

I sent an email asking directly if all the Konig Wheels listed on his site come in 4X110

I also said that the link looks incorrect.

Most likely they ment to show off the Rewinds that will fit our cars.

Will post up once they reply.

warwickben

iTrader: (1)

i dont mean to hijack my own thread , Hades12 what car is that on the left.

Hades12

Kind of Depends on which pic you seen, The pic rotates every time you refresh.

warwickben

iTrader: (1)

did you get a email back?

Hades12

I have not gotten an email.

81WideMariah

iTrader: (8)

GUYS!!!! ATTENTION!!!! your not reading that site correctly, all those wheels listed are in a 4x4.5" bolt pattern (4x114.3mm) so they WILL fit GSL-SE, but not the standard 4x110 BP. If you click on the small hyperlink on the left that says Mazda 4x110 wheels it takes you to a page showing the FAMOUS Konig Rewind.... ands we all already know that it fits. The site is a bit misleading, I think. Just wanted to give a heads up before someone ordered the wrong wheels. Sorry to burst any bubbles.

Hades12

they fixed the site after I sent the email explaning that they link was bad. They did not fix the Datsun link.

tunafish

I left a voice-mail message in the company mailbox earlier in the week, a salesperson called me back and said the web page was incorrect and it would fixed, the only rim offered is the Rewind in Graphite or Silver 15 X 7

Jeff20B

iTrader: (13)

Hey that's good enough for me. The rewind is the only decent looking rim on that site.

djjjr42

Thanks. Falken Ziex 205/50

Jeff20B

iTrader: (13)

Thanks. I kinda Falken tires.

Is the circumference similar to a stock 185 70R 13? I want similar gearing and a somewhat accurate speedo... if possible.

djjjr42

Yes, as close as could be with 15", there is a chart somewhere....
Per my GPS I am actually running 62 when the speedo says 60, but unfortunately I never tried the GPS on the stock setup. FYI IIRC this combo is about 10lbs heavier per wheel, its been a while but I did check the weights and post results in another thread.