im going to turbo the 12a. but i need help
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Location: north carolina
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
im going to turbo the 12a. but i need help
i have t28 garrett i believe.
i would like to know about how to boost prep a carb, and what and all else i should do to make the best of the new turbo :]
i would like to know about how to boost prep a carb, and what and all else i should do to make the best of the new turbo :]
#4
Junior Member
Thread Starter
Join Date: Mar 2007
Location: north carolina
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
right now its stock. thats why im asking what in all i need to do to make the turbo work right....and im looking for low end boost so i dont think the turbo is to small, it is small tho
#5
Senior Member
Join Date: Dec 2005
Location: New Hampshire
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
you will have no gains with that turbo at all , its to small even for stock 12a. you are better off getting a s4 turbo and drill the bolt pattern 5mm to make it fit the 12a , turbo prep your stock nikki www.rotaryshack.com , and get turbot hat from there as well and off you go.
Trending Topics
#8
Senior Member
Join Date: Dec 2005
Location: New Hampshire
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
the tb25 came in volvos in line 5 cylinder and no they would not work for the rotary its to small , any t3 turbo is just to small for the rotary engine. i would still go for the s4 set up and it will be much less and you will have better gains. search on the s4 turbo on the 12a you will find many write ups about this.